AD8310ARMZ Logarithmic Detectors by Analog Devices

Semiconductors - ICs
> Amplifiers & Comparators
> Logarithmic Amplifiers
Status: Production
Series: AD8310
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The AD8310 is a complete, dc to 440 MHz demodulating logarithmic amplifier (log amp) with a very fast voltage mode output, capable of driving up to 25 mA into a grounded load in under 15 ns. It uses the progressive compression (successive detection) technique to provide a dynamic range of up to 95 dB to ±3 dB law conformance or 90 dB to a ±1 dB error bound up to 100 MHz. It is extremely stable and easy to use, requiring no significant external components. A single-supply voltage of 2.7 V to 5.5 V at 8 mA is needed, corresponding to a power consumption of only 24 mW at 3 V. A fast-acting CMOS-compatible enable pin is provided.Each of the six cascaded amplifier/limiter cells has a small-signal gain of 14.3 dB, with a −3 dB bandwidth of 900 MHz. A total of nine detector cells are used to provide a dynamic range that extends from −91 dBV (where 0 dBV is defined as the amplitude of a 1 V rms sine wave), an amplitude of about ±40 μV, up to +4 dBV (or ±2.2 V). The demodulated output is accurately scaled, with a log slope of 24 mV/dB and an intercept of −108 dBV. The scaling parameters are supply- and temperature-independent.The fully differential input offers a moderately high impedance (1 kΩ in parallel with about 1 pF). A simple network can match the input to 50 Ω and provide a power sensitivity of −78 dBm to +17 dBm. The logarithmic linearity is typically within ±0.4 dB up to 100 MHz over the central portion of the range, but it is somewhat greater at 440 MHz. There is no minimum frequency limit; the AD8310 can be used down to low audio frequencies. Special filtering features are provided to support this wide range.The output voltage runs from a noise-limited lower boundary of 400 mV to an upper limit within 200 mV of the supply voltage for light loads. The slope and intercept can be readily altered using external resistors. The output is tolerant of a wide variety of load conditions and is stable with capacitive loads of 100 pF.The AD8310 provides a unique combination of low cost, small size, low power consumption, high accuracy and stability, high dynamic range, a frequency range encompassing audio to UHF, fast response time, and good load-driving capabilities, making this product useful in numerous

Where to Buy

Prices starting from US$5.54

Distributor Stock
Logo for Analog Devices
Analog Devices
from US$9.46
891
in stock
 Buy Now
Logo for Richardson RFPD
Richardson RFPD
from US$8.63
98
in stock
 Buy Now
Logo for Newark
Newark Electronics
from US$11.44
41
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$10.89
41
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$12.20
41
in stock
 Buy Now
Logo for TME
TME
from US$5.54
0
in stock
 Buy Now
Logo for RS Americas
RS Americas
from US$9.47
0
in stock
 Buy Now
Buy Now

Features

Multistage demodulating logarithmic amplifier
Voltage output, rise time <15 ns
High current capacity: 25 mA into grounded RL
95 dB dynamic range: –91 dBV to +4 dBV
Single supply of 2.7 V min at 8 mA typ
DC to 440 MHz operation, ±0.4 dB linearity
Slope of +24 mV/dB, intercept of –108 dBV
Highly stable scaling over temperature
Fully differential dc-coupled signal path
100 ns power-up time, 1 mA sleep current

Last 6 months Inventory & Pricing History

Alternative Descriptions

uSOIC 500MHz 92dB Log Detector | Analog Devices
SP Amp LOG Amp Single R-R I/P 5.5V 8-Pin MSOP Tube | Richardson RFPD
Logarithmic Amplifier, 1.5Mv, 20Ns, Msop | Newark Electronics
LOGARITHMIC AMPLIFIER, 1.5MV, 20NS, MSOP | element14
IC: RF power detector | TME
AMPLIFIER, FAST RESPONCE, DC - 440 MHZ, 90 DB LOGARITHMIC AMPLIFIER, 8-PIN MSO | RS Americas

Frequently Asked Questions

Where can I find additional details, specifications and documents for a AD8310ARMZ?

Additional datasheets, footprints and schematics for AD8310ARMZ are listed on our Part Details page. You can also find images and similar parts to AD8310ARMZ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for AD8310ARMZ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view AD8310ARMZ price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does AD8310ARMZ fall under?

The AD8310ARMZ is listed under Logarithmic Detectors.

Can I view similar or alternative parts?

You can view similar parts to AD8310ARMZ when available in the Logarithmic Detectors range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the AD8310ARMZ you can contact the distributor directly for product support, shipping queries etc.

Is the AD8310ARMZ RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for AD8310ARMZ have stock available?

Authorised distributors including Analog Devices, Richardson RFPD, Newark Electronics, element14 and Farnell have stock available or on a lead time for AD8310ARMZ.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for AD8310ARMZ often in real-time on the comparison pages.

What if I can't find stock of AD8310ARMZ?

You can fill out our help required form which you can use to request a quote for AD8310ARMZ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.