ADUC7121BBCZ ARM7 Core Products by Analog Devices

ARM7 Core Products
Status: Production
Series: ADUC7121
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The ADuC7120/ADuC7121 are fully integrated, 12-bit, 1 MSPS, data acquisition systems incorporating a high performance multichannel ADC, 16-bit/32-bit microcontroller unit (MCU), and Flash®/EE memory on a single chip.The analog-to-digital converter (ADC) consists of eleven single-ended inputs for the ADuC7120 (seven single-ended inputs for the ADuC7121) and two extra differential input pairs. The two differential input pairs can be routed through a programmable gain amplifier (PGA). The ADC can operate in single-ended or differential input mode. The ADC input voltage is 0 V to VREF. A low drift band gap reference, temperature sensor, and voltage comparator complete the ADC peripheral set.The ADuC7120/ADuC7121 provide five current output digital-to-analog converters (DACs). The current sources (five current DACs) feature low noise and low drift, high-side current output at an 11-bit resolution. The five current digital-to-analog converters (IDACs) are as follows: IDAC0 with 250 mA full-scale (FS) output, IDAC1 with 200 mA FS output, IDAC2 with 45 mA FS output, IDAC3 with 80 mA FS output, and IDAC4 with 20 mA FS output.The ADuC7120/ADuC7121 also contain up to 12 voltage output DACs. The DAC output range is programmable to one of three voltage ranges.The devices operate from an on-chip oscillator and a phase-locked loop (PLL) generating an internal high frequency clock of 41.78 MHz (UCLK). This clock is routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The microcontroller core is an ARM7TDMI®, 16-bit/32-bit reduced instruction set computer (RISC) machine, which offers up to 41 MIPS peak performance. 8 kB of SRAM and 126 kB of nonvolatile Flash/EE memory are provided on chip. The ARM7TDMI core views all memory and registers as a single linear array.On-chip factory firmware supports in circuit serial download via the I2C serial interface port; nonintrusive emulation is also supported via the JTAG interface. These features are incorporated into a low cost QuickStart development system supporting this MicroConverter® family.The devices operate from 3.0 V to 3.6 V, and they are specified over the −40°C to +105°C industrial temperature range. The IDACs are powered from a separate input power supply, PVDD. When operating at 41.78 MHz, the power dissipation is typically 120 mW. The ADuC7120/ADuC7121 are available in a 108-ball chip-scale package ball grid array [CSP_BGA].

Where to Buy

Prices starting from US$15.51

Distributor Stock
Logo for Rochester Electronics
Rochester Electronics
from US$16.33
2,655
in stock
 Buy Now
Logo for Analog Devices
Analog Devices
from US$15.51
7
in stock
 Buy Now
Buy Now

Features

Analog input/output
Multiple channel, 12-bit, 1 MSPS ADC
2 differential pairs with input PGA
General-purpose inputs (differential or single-ended)
ADuC7121: 7 channels
Fully differential and single-ended modes
0 V to VREF analog input voltage range (single-ended mode)
5 low noise IDACs
250 mA, 200 mA, 45 mA, 80 mA, 20 mA
12-bit voltage output DACs
ADuC7121: 4 channels
4× 12-bit voltage output DACs
On-chip voltage reference
On-chip temperature sensor
Microcontroller
ARM7TDMI core, 16-bit/32-bit RISC architecture
JTAG port supports code download and debug
Clocking options
Trimmed on-chip oscillator (±3%)
External watch crystal
External clock source up to 41.78 MHz
41.78 MHz PLL with programmable divider
Memory
126 kB Flash/EE memory, 8 kB SRAM
In-circuit download, JTAG-based debug
Software triggered in-circuit reprogrammability
On-chip peripherals
UART, 2 × I2C and SPI serial I/O
32-pin GPIO port
4× general-purpose timers
Wake-up timers and WDT
Power supply monitor
IDAC monitor
Temperature monitor
Vectored interrupt controller for FIQ and IRQ
8 priority levels for each interrupt type
Interrupt on edge or level external pin inputs
Power
Specified for 3 V operation
Normal mode: 11 mA at 5.22 MHz, 30 mA at 41.78 MHz
Packages and temperature range
7 mm × 7 mm 108-ball CSP_BGA
Fully specified for –40°C to +105°C operation
Tools
Low cost QuickStart development system
Full third party support

Last 6 months Inventory & Pricing History

Alternative Descriptions

PRECISION ANALOG MCU I.C | Analog Devices

Frequently Asked Questions

Where can I find additional details, specifications and documents for a ADUC7121BBCZ?

Additional datasheets, footprints and schematics for ADUC7121BBCZ are listed on our Part Details page. You can also find images and similar parts to ADUC7121BBCZ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for ADUC7121BBCZ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ADUC7121BBCZ price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does ADUC7121BBCZ fall under?

The ADUC7121BBCZ is listed under ARM7 Core Products.

Can I view similar or alternative parts?

You can view similar parts to ADUC7121BBCZ when available in the ARM7 Core Products range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the ADUC7121BBCZ you can contact the distributor directly for product support, shipping queries etc.

Is the ADUC7121BBCZ RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for ADUC7121BBCZ have stock available?

Authorised distributors including Rochester Electronics and Analog Devices have stock available or on a lead time for ADUC7121BBCZ.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for ADUC7121BBCZ often in real-time on the comparison pages.

What if I can't find stock of ADUC7121BBCZ?

You can fill out our help required form which you can use to request a quote for ADUC7121BBCZ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.