AT91SAM9CN12B-CU More Semiconductors - ICs by Microchip Technology
| Status: | Not Recommended |
|---|---|
| Series: | AT91SAM9CN12 |
| RoHS: | Compliant |
The Microchip's ARM®-based SAM9CN12 is an ARM926EJ-S -based MPU that provides secure boot, an encryption engine, user interface functionality and high data rate connectivity. Plus it offers power efficiency and reduced BOM cost, making it the ideal solution for cost-sensitive industrial applications that require security features in addition to graphics LCD and user interface software functionality.
Features
| ARM926EJ-S ARM® Thumb® Processor running up to 400 MHz |
| 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories |
| One 128-Kbyte internal ROM embedding standard or secure bootstrap routine |
| One 32-Kbyte internal SRAM, single-cycle access at system speed |
| 32-bit External Bus Interface supporting 8-bank DDR2/LPDDR, SDR/LPSDR, Static Memories |
| MLC/SLC NAND Controller, with up to 24-bit Programmable Multibit Error Correction Code (PMECC) System running up to 133 MHz |
| Power-on Reset, Reset Controller, Shutdown Controller, Periodic Interval Timer, Watchdog Timer and Real Time Clock |
| Boot Mode Select Option, Remap Command |
| Internal Low Power 32 kHz RC and Fast 12 MHz RC Oscillators |
| Selectable 32768 Hz Low-power Oscillator, 16 MHz Oscillator, one PLL for the system and one PLL optimized for USB |
| Six 32-bit-layer AHB Bus Matrix |
| Dual Peripheral Bridge with dedicated programmable clock |
| One dual port 8-channel DMA Controller |
| Advanced Interrupt Controller (AIC) |
| Two Programmable External Clock Signals |
| Low-power Mode |
| Shutdown Controller with four 32-bit General-purpose Backup Registers |
| Clock Generator and Power Management Controller |
| Very Slow Clock Operating Mode, Software Programmable Power Optimization Capabilities |
| LCD Controller |
| USB Device Full Speed with dedicated On-chip Transceiver |
| USB Host Full Speed with dedicated On-chip Transceiver |
| One High-speed SD card and SDIO Host Controller |
| Two Master/Slave Serial Peripheral Interfaces (SPI) |
| Two 3-channel 32-bit Timer/Counters (TC) |
| One Synchronous Serial Controller (SSC) |
| One 4-channel 16-bit PWM Controller |
| Two 2-wire Interfaces (TWI) |
| Four Universal Synchronous Asynchronous Receiver Transmitters (USART) |
| Two Universal Asynchronous Receiver Transmitters (UART) |
| One Debug Unit (DBGU) |
| One 12-channel 10-bit Analog-to-Digital Converter with up to 5-wire resistive Touchscreen support |
| Crystal Failure Detection |
| Independent Watchdog |
| Power-on Reset Cells |
| Register Write Protection |
| SHA (SHA1 and SHA256) Compliant with FIPS Publication 180-2 (SAM9CN11/SAM9CN12 devices) |
| True Random Number Generator (TRNG) compliant with NIST Special Publication 800-22 |
| AES 256-, 192-, 128-bit Key Algorithm compliant with FIPS Publication 197 (SAM9CN11/SAM9CN12 devices) |
| 256 Fuse bits for crypto key and 64 Fuse bits for device configuration, including JTAG disable and forced boot from the on-chip ROM (Secure Boot feature - SAM9CN12 only) |
| Four 32-bit Parallel Input/Output Controllers |
| 105 Programmable I/O Lines Multiplexed with up to Three Peripheral I/Os |
| Input Change Interrupt Capability on Each I/O Line, optional Schmitt Trigger input |
| Individually Programmable Open-drain, Pull-up and Pull-down Resistor, Synchronous Output |
| 217-ball BGA, pitch 0.8 mm |
| 247-ball BGA, pitch 0.5 mm |
Specifications
| Part Family | SAM9N |
|---|---|
| Core | ARM926 |
| FPU | No |
| MaxSpeed (MHz) | 400 |
| Operation Voltage Min.(V) | 0.9 |
| Operation Voltage Max.(V) | 1.1 |
| Internal Oscillator | 32KHz |
| L1 Cache Memory (Instructions) (KB) | 16 |
| L1 Cache Memory (Data) (KB) | 16 |
| DRAM Memory Interface | SDRAM/LPSDRAM/LPDDR/DDR2 |
| DRAM Memory Bus Size (Bits) | 16 |
| Internal DRAM Amount (MB) | 0 |
| NAND Interface | Yes |
| ECC Bits on NAND interface | 24 |
| # of EBIs | 1 |
| SDIO/SD-CARD/eMMC | 1 |
| Direct Memory Access (DMA) Channels | 19 |
| Max I/O Pins | 105 |
| Pin Count | 217 |
| ISO 7816 | 4 |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| LIN | Yes |
| LCD/Graphics Interface | Yes |
| Graphic LCD (GLCD) (bits) | 24-bit |
| Camera Interface | No |
| Secure Bootloader | Yes |
| Crypto Engine | Yes |
| Anti-Tampering Inputs | 0 |
| Environmental Monitors | No |
| Secure Key Storage (Fuse bits) | 0 |
| ADC Channels | 12 |
| Max ADC Resolution (bits) | 10 |
| Max ADC Sampling Rate (ksps) | 440 |
| Temp Sensor | No |
| Hardware RTCC | Yes |
| Watch Dog Timers (WDT) | Yes |
| Quadrature Encoder Interface (QEI) | 0 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 85 |
| Pins | Packaging | 217 | LFBGA |
| Temp Range | -40C to +85C |
| Packing Media | Tray (126) |
Last 6 months Inventory & Pricing History
Resources
Board Design Files |
|---|
| AT91SAM9CN11-EK__KitsFiles_readme |
| AT91SAM9CN11-EK__KitsFiles |
User Guides |
|---|
| SAM9N12-SAM9CN11 EK User Guide |
Environmental Information
| JEDEC Indicator | e8 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.5267 |
| Shipping Weight (kg) | 1.507937 |
| Lead Count | 217 |
| Package Type | LFBGA |
| Package Width or Size | 15x15x1.46mm |
| Soldering Composition | SAC105 |
Alternative Descriptions
| BGA, GREEN, IND TEMP, CRYPTO,MRL B | Microchip Technology |
| Bga, Green, Ind Temp, Crypto, mrl B 217 Lfbga 15X15X1.46Mm Tray Rohs Compliant: Yes |Microchip Technology AT91SAM9CN12B-CU | Newark Electronics |
| MCU 32-bit SAM9C ARM926EJ-S RISC 128KB ROM 1V/1.8V/3.3V 217-Pin BGA Tray | Avnet America |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a AT91SAM9CN12B-CU?
Additional datasheets, footprints and schematics for AT91SAM9CN12B-CU are listed on our Part Details page. You can also find images and similar parts to AT91SAM9CN12B-CU on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for AT91SAM9CN12B-CU on our Product Comparison page. Access via the 'View Pricing & Stock' button to view AT91SAM9CN12B-CU price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does AT91SAM9CN12B-CU fall under?
The AT91SAM9CN12B-CU is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to AT91SAM9CN12B-CU when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the AT91SAM9CN12B-CU you can contact the distributor directly for product support, shipping queries etc.
Is the AT91SAM9CN12B-CU RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for AT91SAM9CN12B-CU have stock available?
Authorised distributors including Microchip Technology, Newark Electronics, Avnet America, EBV Elektronik and Avnet Silica have stock available or on a lead time for AT91SAM9CN12B-CU.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for AT91SAM9CN12B-CU often in real-time on the comparison pages.
What if I can't find stock of AT91SAM9CN12B-CU?
You can fill out our help required form which you can use to request a quote for AT91SAM9CN12B-CU from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.