ATSAM4S2CA-AU Microcontrollers - MCU by Microchip Technology
| Status: | Active |
|---|---|
| Series: | ATSAM4S2C |
| RoHS: | Compliant |
Microchip's ARM®-based SAM4S2C microcontroller builds on the high-performance 32-bit Cortex®-M4 core.
The SAM4S2C features:
- Maximum operating speed of 120MHz
- 128KB of flash memory and 64KB of SRAM
- 1.62V to 3.6V supply
- Power consumption of 180uA/MHz in dynamic mode, below 25uA in RAM retention mode and 1uA at 1.8V in back-up mode with the RTC running
- External bus interface supports SRAM, PSRAM, NOR Flash, LCD module and NAND Flash
- Extensive peripheral set for connectivity, system control and analog interfacing
- Native support for Microchip QTouch capacitive touch technology for implementation of buttons, sliders and wheels
- Pin-to-pin compatible with Microchip SAM7S, SAM3N, SAM4N and SAM3S MCUs
- Parallel Input/Output (IO) data capture mode
Where to Buy
Prices starting from US$3.19
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$3.19
|
68,588
in stock
|
Buy Now |
|
RS
from US$3.66
|
0
in stock
|
Buy Now |
|
Newark Electronics
from US$3.73
|
0
in stock
|
Buy Now |
|
TME
from US$3.76
|
0
in stock
|
Buy Now |
|
element14
from US$4.02
|
0
in stock
|
Buy Now |
|
Farnell
from US$4.17
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
Features
| ARM Cortex-M4 running at up to 120 MHz |
| Memory Protection Unit (MPU) |
| DSP Instructions, Thumb®-2 instruction set |
| 128 Kbytes embedded Flash, ECC, Security Bit and Lock Bits |
| 64 Kbytes embedded SRAM |
| 16 Kbytes ROM with embedded boot loader routines (UART, USB) and IAP routines |
| 8-bit Static Memory Controller (SMC): SRAM, PSRAM, NOR and NAND Flash support |
| External Bus Interface - 8-bit data, 4 chip selects, 24-bit address |
| Embedded voltage regulator for single-supply operation |
| Power-on-Reset (POR), Brown-out Detector (BOD) and Dual Watchdog for Safe Operation |
| Quartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for RTT or system clock |
| RTC with Gregorian and Persian Calendar Mode, Waveform Generation in Backup mode |
| RTC counter calibration circuitry compensates for 32.768 kHz crystal frequency inaccuracy |
| Slow clock internal RC oscillator as permanent low-power mode device clock |
| High-precision 8/12 MHz factory-trimmed internal RC oscillator with 4 MHz default frequency for device startup, in-application trimming access for frequency adjustment |
| Two PLL up to 240 MHz for Device Clock and for USB |
| Temperature Sensor |
| Low-power tamper detection on two inputs, anti-tampering by immediate clear of general-purpose backup registers (GPBR) |
| 22 Peripheral DMA Controllers |
| Sleep, Wait and Backup modes; consumption down to 1 µA in Backup mode |
| 100-lead LQFP, 14 x 14 mm, pitch 0.5 mm |
| 100-lead TFBGA, 9 x 9 mm, pitch 0.8 mm |
| 100-lead VFBGA, 7 x 7 mm, pitch 0.65 mm |
| Revision A - Industrial (-40° C to +85° C), Revision B -(-40° C to +105° C) |
| USB 2.0 Device: 12 Mbps, 2668 byte FIFO, up to 8 bidirectional Endpoints, on-chip transceiver |
| Up to two USARTs with ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Mode |
| Two 2-wire UARTs |
| Up to two 2-Wire Interface modules (I2C-compatible), one SPI, one Serial Synchronous Controller (I2S), one high-speed Multimedia Card Interface (SDIO/SD Card/MMC) |
| Two 3-channel 16-bit Timer Counters with capture, waveform, compare and PWM mode, Quadrature decoder logic and 2-bit Gray up/down counter for stepper motor |
| 4-channel 16-bit PWM with complementary output, fault input, 12-bit dead time generator counter for motor control |
| 32-bit Real-time Timer and RTC with calendar, alarm and 32 kHz trimming features |
| 256-bit General Purpose Backup Registers (GPBR) |
| 32-bit Cyclic Redundancy Check Calculation Unit (CRCCU) for data integrity check of off-/on-chip memories |
| 79 I/O Lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and on-die series resistor termination |
| Three 32-bit Parallel Input/Output Controllers, Peripheral DMA-assisted Parallel Capture mode |
| 16-channel, 1Msps ADC with differential input mode and programmable gain stage and auto calibration |
| One 2-channel 12-bit 1Msps DAC |
| One Analog Comparator with flexible input selection, selectable input hysteresis |
| Serial Wire/JTAG Debug Port(SWJ-DP) |
| Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset. |
| Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access. |
| Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches. |
| Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling. |
| Instrumentation Trace Macrocell (ITM) for support of printf style debugging. |
| IEEE1149.1 JTAG Boundary-scan on all digital pins. |
| ASF-Atmel software Framework – SAM software development framework |
| Integrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers. |
| DMA support, Interrupt handlers Driver support |
| USB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption Stacks |
| RTOS integration, FreeRTOS is a core component |
Specifications
| Part Family | ATSAM4S2C |
|---|---|
| CPU Type | Cortex-M4 |
| MaxSpeed (MHz) | 120 |
| Program Memory Size (KB) | 128 |
| SRAM (KB) | 64 |
| Data EEPROM (bytes) | 0 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 85 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Direct Memory Access (DMA) Channels | 22 |
| SPI™ | 3 |
| I2C | 2 |
| UART | 4 |
| I2S | 1 |
| Ethernet | None |
| SDIO/SD-CARD/eMMC | 1 |
| Quadrature Encoder Interface (QEI) | 1 |
| Crypto Engine | No |
| Number of USB Modules | 1 |
| USB Interface | Full Speed |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| ADC Channels | 15 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 1000 |
| Number of DACs | 1 |
| Input Capture | 12 |
| Standalone Output Compare/ Standard PWM | 0 |
| Motor Control PWM Channels | 0 |
| Max 16 Bit Digital Timers | 6 |
| Number of Comparators | 1 |
| Internal Oscillator | 4,8,12Mhz,32Khz |
| Hardware RTCC | Yes |
| Max I/O Pins | 79 |
| Pin Count | 100 |
| Low Power | No |
| Pins | Packaging | 100 | LQFP |
| Temp Range | -40C to +85C |
| Packing Media | Tray (90) |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| SAM4S Series Datasheet |
Design Checklist |
|---|
| Basic 32-Bit MCU Design and Troubleshooting Checklist |
Product Brief |
|---|
| Various Timers on SAM Devices Tech Brief |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.5804 |
| Shipping Weight (kg) | 6.666667 |
| Lead Count | 100 |
| Package Type | LQFP |
| Package Width or Size | 14x14x1.4mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| LQFP,GREEN,IND TEMP,MRL A | Microchip Technology |
| Microchip ATSAM4S2CA-AU Microcontroller | RS |
| Mcu, 32Bit, Cortex-M4, 120Mhz, Lqfp-100 | Newark Electronics |
| IC: ARM microcontroller | TME |
| MCU, 32BIT, CORTEX-M4, 120MHZ, LQFP-100 | element14 |
| MCU 32-Bit SAM4S ARM Cortex M4 RISC 128KB Flash 1.2V/3.3V 100-Pin LQFP Tray | EBV Elektronik |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a ATSAM4S2CA-AU?
Additional datasheets, footprints and schematics for ATSAM4S2CA-AU are listed on our Part Details page. You can also find images and similar parts to ATSAM4S2CA-AU on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAM4S2CA-AU on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAM4S2CA-AU price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does ATSAM4S2CA-AU fall under?
The ATSAM4S2CA-AU is listed under Semiconductors - ICs > Microcontrollers - MCU > 16 / 32 Bit Microcontrollers - MCU - ARM.
Can I view similar or alternative parts?
You can view similar parts to ATSAM4S2CA-AU when available in the 16 / 32 Bit Microcontrollers - MCU - ARM range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAM4S2CA-AU you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAM4S2CA-AU RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAM4S2CA-AU have stock available?
Authorised distributors including Microchip Technology, RS, Newark Electronics, TME and element14 have stock available or on a lead time for ATSAM4S2CA-AU.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAM4S2CA-AU often in real-time on the comparison pages.
What if I can't find stock of ATSAM4S2CA-AU?
You can fill out our help required form which you can use to request a quote for ATSAM4S2CA-AU from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.