ATSAMD20E16B-UUT More Semiconductors - ICs by Microchip Technology
| Status: | Active |
|---|---|
| Series: | ATSAMD20E16 |
| RoHS: | Compliant |
A low-power, high-performance Microchip's ARM® Cortex®-M0+ based flash microcontroller, the ATSAMD20E16 is ideal for a wide range of home automation, consumer, metering, and industrial applications. It features:
- 64KB of flash and 8KB of SRAM
- Up to 48MHz operating frequency
- Four serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C, six 16-bit timer/counters, 32-bit Real Time clock and calendar, 10 PWM channels, one 10-channel 12-bit ADC, one 10-bit DAC
- Support for up to 60 touch channels
- 1.62V to 3.63V power supply
- Easy pin migration to SAMD20G and SAMD20J devices
Supported by MPLAB X IDE and MPLAB Harmony.
No distributors results available
Features
| ARM Cortex-M0+ CPU running at up to 48MHz |
| Single-cycle hardware multiplier |
| 64KB in-system self-programmable Flash |
| 8KB SRAM memory |
| Power-on reset (POR) and brown-out detection (BOD) |
| Internal and external clock options with 48MHdigital frequency locked loop (DFLL48M) and 48MHto 96MHz |
| fractional digital phase locked loop (FDPLL96M) |
| External interrupt controller (EIC) |
| 16 external interrupts |
| One non-maskable interrupt |
| Two-pin serial wire debug (SWD) programming, test and debugging interface |
| Idle and standby sleep modes |
| SleepWalking peripherals |
| 8-channel event system |
| One 16-bit TC with compare/capture channels |
| One 8-bit TC with compare/capture channels |
| One 32-bit TC with compare/capture channels, by using two TCs |
| 32-bit real time counter (RTC) with clock/calendar function |
| Watchdog timer (WDT) |
| CRC-32 generator |
| USART with full-duplex and single-wire half-duplex configuration |
| I2C up to 40kHz |
| SPI |
| Differential and single-ended input |
| 1/2x to 16x programmable gain stage |
| Automatic offset and gain error compensation |
| Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution |
| 10-bit, 350ksps digital-to-analog converter (DAC) |
| Two analog comparators (AC) with window compare function |
| 256-channel capacitive touch and proximity sensing |
| 26 GPIO pins |
| 32-pin TQFP, QFN |
| 1.62V to 3.63V |
| Down to 70µA/MHz in active mode |
| Down to 8µA running the peripheral Touch Controller |
| –40 to +105°C |
Specifications
| Part Family | SAMD20 |
|---|---|
| CPU Type | Cortex-M0+ |
| MaxSpeed (MHz) | 48 |
| Program Memory Size (KB) | 64 |
| SRAM (KB) | 8 |
| Data EEPROM (bytes) | 0 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 125 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.63 |
| SPI | 4 -SPI |
| I2C | 4 |
| UART | 4 |
| I2S | 0 |
| Ethernet | None |
| USB Interface | None |
| Number of USB Modules | 0 |
| Type of CAN module | None |
| Number of CAN Modules | 0 |
| Crypto Engine | No |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 350 |
| ADC Channels | 10 |
| Max DAC Resolution (bits) | 10 |
| DAC outputs | 1 |
| Hardware Touch Peripheral | PTC |
| Number of Comparators | 2 |
| Motor Control PWM Channels | 0 |
| Quadrature Encoder Interface (QEI) | 0 |
| Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
| Hardware RTCC | Yes |
| Max I/O Pins | 26 |
| Pin Count | 32 |
| Low Power | Yes |
Resources
Data Sheets |
|---|
| SAM D20 Family Data Sheet |
Board Design Files |
|---|
| STK600-RC032SAM-79 |
| STK600-RC048SAM-78 |
| STK600-RC064SAM-87 |
| STK600-RC048SAM-88 |
| STK600-RC032SAM-89 |
| STK600-RC064SAM-72 |
Brochures |
|---|
| 32-bit Microcontroller Families Brochure |
| 32-bit Peripherals Quick Reference Card |
| 32-bit MCU Low Power Sell Sheet |
Design Checklist |
|---|
| Basic 32-Bit MCU Design and Troubleshooting Checklist |
Miscellaneous |
|---|
| QTouch Library Selection Guide |
Environmental Information
| JEDEC Indicator | e1 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.0 |
| Shipping Weight (kg) | 0.0638 |
| Lead Count | 27 |
| Package Type | WLCSP |
| Package Width or Size | 2.199x2.215x0.483mm |
| Soldering Composition | SAC405 |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a ATSAMD20E16B-UUT?
Additional datasheets, footprints and schematics for ATSAMD20E16B-UUT are listed on our Part Details page. You can also find images and similar parts to ATSAMD20E16B-UUT on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAMD20E16B-UUT on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAMD20E16B-UUT price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does ATSAMD20E16B-UUT fall under?
The ATSAMD20E16B-UUT is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to ATSAMD20E16B-UUT when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAMD20E16B-UUT you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAMD20E16B-UUT RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAMD20E16B-UUT have stock available?
There is no stock from authorised distributors for ATSAMD20E16B-UUT.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAMD20E16B-UUT often in real-time on the comparison pages.
What if I can't find stock of ATSAMD20E16B-UUT?
You can fill out our help required form which you can use to request a quote for ATSAMD20E16B-UUT from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.