ATSAMD21E15C-UUT More Semiconductors - ICs by Microchip Technology
| Status: | Active |
|---|---|
| Series: | ATSAMD21E15 |
| RoHS: | Compliant |
NOTE: ATSAMD21E15A is not recommended for new designs, please use ATSAMD21E15B.
A low-power, high-performance Microchip's ARM® Cortex®-M0+ based flash microcontroller, the ATSAMD21E15 is ideal for a wide range of home automation, consumer, metering, and industrial applications. It features:
It features:
32KB of Flash and 4KB of SRAM
Up to 48MHz operating frequency
Five serial communication (SERCOM) modules configurable as UART/USART, SPI or I2C, four 16-bit timer/counters, two 24-bit timer/counters, 32-bit Real-Time Clock and calendar, one 14-channel 12-bit ADC, one 10-bit DAC and four analog comparators
1.62V to 3.63V power supply
32-pin package with up to 26 GPIO pins
Supported by MPLAB X IDE and MPLAB Harmony.
Functional Safety
This device supports the ISO 26262 (ASIL B), IEC 61508 (SIL 2) and IEC 60730 (Class B) functional safety standards.
· The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety web page.
· To request any information about the SIL 2 STL, please fill out and submit the request form on Industrial Safety Self-Test Library web page.
· Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.
Features
| Single-cycle hardware multiplier |
| Micro Trace Buffer |
| 32KB in-system self-programmable Flash |
| 4KB SRAM Memory |
| Power-on reset (POR) and brown-out detection (BOD) |
| Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional |
| External Interrupt Controller (EIC) |
| 16 external interrupts |
| One non-maskable interrupt |
| Two-pin Serial Wire Debug (SWD) programming, test and debugging interface |
| Drop in compatible with SAM D20 |
| Idle and standby sleep modes |
| SleepWalking peripherals |
| 12-channel Direct Memory Access Controller (DMAC) |
| 12-channel Event System |
| One 16-bit TC with compare/capture channels |
| One 8-bit TC with compare/capture channels |
| One 32-bit TC with compare/capture channels, by using two TCs |
| Up to four compare channels with optional complementary output |
| Generation of synchronized pulse width modulation (PWM) pattern across port pins |
| Deterministic fault protection, fast decay and configurable dead-time between complementary output |
| Dithering that increase resolution with up to 5 bit and reduce quantization error |
| 32-bit Real Time Counter (RTC) with clock/calendar function |
| Watchdog Timer (WDT) |
| CRC-32 generator |
| Embedded device function |
| Eight endpoints |
| USART with full-duplex and single-wire half-duplex configuration |
| I2C Bus up to 3.4MHz |
| SMBUS/PMBUS |
| SPI |
| LIN Client |
| Differential and single-ended input |
| 1/2x to 16x programmable gain stage |
| Automatic offset and gain error compensation |
| Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution |
| 10-bit, 350ksps Digital-to-Analog Converter (DAC) |
| Two Analog Comparators (AC) with window compare function |
| 256-channel capacitive touch and proximity sensing |
| 26 GPIO pins |
| 32-pin TQSP, QFN, WLCSP |
| 1.62V – 3.63V |
Specifications
| Part Family | SAMD21 |
|---|---|
| CPU Type | Cortex-M0+ |
| MaxSpeed (MHz) | 48 |
| Program Memory Size (KB) | 32 |
| SRAM (KB) | 4 |
| Data EEPROM (bytes) | 1024 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 125 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.63 |
| Direct Memory Access (DMA) Channels | 12 |
| SPI | 4 -SPI |
| I2C | 4 |
| UART | 4 |
| I2S | 1 |
| Ethernet | None |
| USB Interface | Full Speed |
| Number of USB Modules | 1 |
| Type of CAN module | None |
| Number of CAN Modules | 0 |
| Crypto Engine | No |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 350 |
| ADC Channels | 10 |
| Max DAC Resolution (bits) | 10 |
| DAC outputs | 1 |
| Hardware Touch Peripheral | PTC |
| Number of Comparators | 2 |
| Motor Control PWM Channels | 12 |
| Quadrature Encoder Interface (QEI) | 0 |
| Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
| Hardware RTCC | Yes |
| Max I/O Pins | 26 |
| Pin Count | 32 |
| Low Power | Yes |
| Pins | Packaging | 35 | WLCSP |
| Temp Range | -40C to +85C |
| Packing Media | Tape and reel (5000) |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| SAM D21/DA1 Family Data Sheet |
Board Design Files |
|---|
| STK600-RC032SAM-79 |
| STK600-RC048SAM-78 |
| STK600-RC064SAM-87 |
| STK600-RC048SAM-88 |
| STK600-RC032SAM-89 |
| STK600-RC064SAM-72 |
Design Checklist |
|---|
| Basic 32-Bit MCU Design and Troubleshooting Checklist |
Miscellaneous |
|---|
| QTouch Library Selection Guide |
Environmental Information
| JEDEC Indicator | e1 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.0 |
| Shipping Weight (kg) | 0.1278 |
| Lead Count | 35 |
| Package Type | WLCSP |
| Package Width or Size | 2.78x2.578x0.4mm |
| Soldering Composition | SAC405 |
Alternative Descriptions
| 35WLCSP,85C TEMP, GREEN, 48MHZ, T&R | Microchip Technology |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a ATSAMD21E15C-UUT?
Additional datasheets, footprints and schematics for ATSAMD21E15C-UUT are listed on our Part Details page. You can also find images and similar parts to ATSAMD21E15C-UUT on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAMD21E15C-UUT on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAMD21E15C-UUT price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does ATSAMD21E15C-UUT fall under?
The ATSAMD21E15C-UUT is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to ATSAMD21E15C-UUT when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAMD21E15C-UUT you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAMD21E15C-UUT RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAMD21E15C-UUT have stock available?
Authorised distributors including Microchip Technology and EBV Elektronik have stock available or on a lead time for ATSAMD21E15C-UUT.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAMD21E15C-UUT often in real-time on the comparison pages.
What if I can't find stock of ATSAMD21E15C-UUT?
You can fill out our help required form which you can use to request a quote for ATSAMD21E15C-UUT from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.