ATSAMG53N19A-AU More Semiconductors - ICs by Microchip Technology
| Status: | Active |
|---|---|
| Series: | ATSAMG53 |
| RoHS: | Compliant |
The Microchip's SAM G53 has an ARM® Cortex®-M4 core with an FPU (floating point unit) to maximize data throughput. This allows you to minimize the active-mode power consumption and get the core into sleep mode faster, which will reduce the overall power consumption.
The device has 16 DMA channels, which contribute to the extremely high throughput.
The combination of ultra-low power consumption, fast wake-up time, and high throughput is what gives the SAM G53 the edge in space- and power-constrained consumer applications such as sensor hubs. It wakes up quickly, has the throughput needed to reduce the amount of time spent in active mode, and then goes back to sleep with SRAM retention to conserve energy.
This gives the best performance and longest battery life. It is fully-functional all the way down to 1.7V, including flash reads and writes, as well as full ADC operation. This allows for a more flexible power supply scheme that will squeeze extra runtime out of a battery.
Supported by MPLAB X IDE and MPLAB Harmony.
Where to Buy
Prices starting from US$2.29
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$3.37
|
4,050
in stock
|
Buy Now |
|
Newark Electronics
from US$3.97
|
0
in stock
|
Buy Now |
|
Future Electronics
from US$4.09
|
0
in stock
|
Buy Now |
|
Avnet America
from US$4.09
|
0
in stock
|
Buy Now |
|
TME
from US$3.76
|
0
in stock
|
Buy Now |
|
Farnell
from US$2.29
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
| Buy Now |
Features
| ARM Cortex-M4 with up to 96 Kbytes SRAM on I/D bus providing 0 wait state execution at up to 48 MHz |
| Memory Protection Unit (MPU) |
| DSP Instructions, Floating Point Unit (FPU), Thumb®-2 instruction set |
| Up to 512 Kbytes embedded Flash |
| Up to 96 Kbytes embedded SRAM |
| SAM G53 devices ship with a factory-programmed boot loader in Flash. |
| Embedded voltage regulator for single-supply operation |
| Power-on reset (POR) and Watchdog for safe operation |
| Quartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for RTT or system clock |
| High-precision 8/16/24 MHz factory-trimmed internal RC oscillator. In-application trimming access for frequency adjustment |
| Slow clock internal RC oscillator as permanent low-power mode device clock |
| PLL range from 48 MHz to 120 MHz for device clock |
| PLL range from 24 MHz to 48 MHz for USB device and USB OHCI |
| Up to 30 peripheral DMA (PDC) channels |
| 256-bit General-Purpose Backup Registers (GPBR) 16 external interrupt lines |
| 49-lead WLCSP, 100-pin LQFP, 14 x 14 mm, pitch 0.5 mm |
| Industrial (-40° C to +85° C) |
| One USART with SPI mode |
| 2 Inter-IC Sound Controllers (I2S) |
| Two UARTs |
| Three Two-Wire Interface (TWI) modules featuring two TWI masters and one high-speed TWI slave |
| One fast SPI at up to 24Mbit/s |
| Two three-channel 16-bit Timer/Counters (TC) with Capture, Waveform, Compare and PWM modes |
| One 32-bit Real-Time Timer (RTT) |
| Up to 38 controllable I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and on-die series resistor termination. Individually programmable open-drain, pull-up and pull-down resistor and synchronous output |
| Two-way one-channel Pulse Density Modulation (PDM) (interfaces up to two microphones in PDM mode) |
| One 8-channel ADC, resolution up to 12 bits, sampling rate up to 800 kSps |
| Serial Wire/JTAG Debug Port(SWJ-DP) |
| Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset. |
| Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access. |
| Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches. |
| Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling. |
| Instrumentation Trace Macrocell (ITM) for support of printf style debugging. |
| IEEE1149.1 JTAG Boundary-scan on all digital pins. |
| ASF-Atmel software Framework – SAM software development framework |
| Integrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers. |
| DMA support, Interrupt handlers Driver support |
| USB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption Stacks |
| RTOS integration, FreeRTOS is a core component |
Specifications
| Part Family | ATSAMG53 |
|---|---|
| CPU Type | Cortex-M4 |
| MaxSpeed (MHz) | 48 |
| Program Memory Size (KB) | 512 |
| SRAM (KB) | 96 |
| Data EEPROM (bytes) | 0 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 85 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.6 |
| Direct Memory Access (DMA) Channels | 28 |
| SPI™ | 1 |
| I2C | 3 |
| UART | 4 |
| I2S | 0 |
| Ethernet | None |
| Quadrature Encoder Interface (QEI) | 0 |
| Crypto Engine | No |
| Number of USB Modules | 0 |
| USB Interface | None |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| ADC Channels | 8 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 800 |
| Number of DACs | 0 |
| Input Capture | 6 |
| Standalone Output Compare/ Standard PWM | 0 |
| Motor Control PWM Channels | 0 |
| Max 16 Bit Digital Timers | 3 |
| Number of Comparators | 0 |
| Internal Oscillator | 8,16,24Mhz,32Khz |
| Hardware RTCC | Yes |
| Max I/O Pins | 38 |
| Pin Count | 100 |
| Low Power | Yes |
| Pins | Packaging | 100 | LQFP |
| Temp Range | -40C to +85C |
| Packing Media | Tray (90) |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| SAM G53 Series Datasheet |
Board Design Files |
|---|
| ATSAMG55-XPRO Design Documentation |
Design Checklist |
|---|
| Basic 32-Bit MCU Design and Troubleshooting Checklist |
Miscellaneous |
|---|
| QTouch Library Selection Guide |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.5804 |
| Shipping Weight (kg) | 6.666667 |
| Lead Count | 100 |
| Package Type | LQFP |
| Package Width or Size | 14x14x1.4mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| TQFP, IND TEMP | Microchip Technology |
| Tqfp, Ind Temp 100 Lqfp 14X14X1.4Mm Tray Rohs Compliant: Yes |Microchip Technology ATSAMG53N19A-AU | Newark Electronics |
| IC MCU 32BIT 512KB FLASH 100LQFP | Future Electronics |
| IC: ARM microcontroller | TME |
| MCU, 32BIT, ARM CORTEX-M4, 48MHZ, LQFP | Farnell |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a ATSAMG53N19A-AU?
Additional datasheets, footprints and schematics for ATSAMG53N19A-AU are listed on our Part Details page. You can also find images and similar parts to ATSAMG53N19A-AU on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAMG53N19A-AU on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAMG53N19A-AU price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does ATSAMG53N19A-AU fall under?
The ATSAMG53N19A-AU is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to ATSAMG53N19A-AU when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAMG53N19A-AU you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAMG53N19A-AU RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAMG53N19A-AU have stock available?
Authorised distributors including Microchip Technology, Newark Electronics, Future Electronics, Avnet America and TME have stock available or on a lead time for ATSAMG53N19A-AU.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAMG53N19A-AU often in real-time on the comparison pages.
What if I can't find stock of ATSAMG53N19A-AU?
You can fill out our help required form which you can use to request a quote for ATSAMG53N19A-AU from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.