BD71837AMWV-E2 Power Management ICs - PMIC by Rohm

System PMIC for i.MX 8M Family


BD71837AMWV integrates all power rails required by i.MX 8M processors and system peripherals. In addition to integrate a sequencer compatible with power modes supported by i.MX 8M processors, making it possible to significantly reduce the development time, decrease size, and simplify application design. The power supply circuit of the BD71837AMWV, designed specifically for the power supply system of the i.MX 8M processor family, integrates an 8 buck converters, 7 LDOs, and control logic that allows it to supply power not only to the processor, but the required DDR memory as well – all from a single chip. A 1.8V/3.3V power switch for SDXC cards is also built in, along with a 32.768kHz crystal oscillator driver and multiple protection circuits such as output short-circuit, output over-voltage/current, and thermal shutdown. Buck conversion efficiency from 83 to 95% is achieved for 0.7V to 3.3V output, and the wide input voltage range from 2.7V to 5.5V supports a variety of power sources, from batteries to USB, making them ideal for i.MX 8M applications. Furthermore, when single-sided mounting and Type-3 PCB is assumed, 56 fewer parts are needed compared with discrete solutions, reducing PCB area by up to 45%.

Where to Buy

Prices starting from US$1.11

Distributor Stock
Logo for element14 Singapore
element14
from US$5.39
2,345
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$3.70
2,345
in stock
Buy Now
Logo for CoreStaff
CoreStaff
from US$5.44
937
in stock
Buy Now
Logo for Newark
Newark Electronics
from US$1.11
129
in stock
Buy Now
Logo for Avnet Asia
Avnet Asia
-
0
in stock
Buy Now
Buy Now

Features

8 Buck Regulators
2.0 MHz Switching Frequency. (BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK7, and BUCK8).
1.5MHz Switching Frequency. (BUCK6)
7ch Linear Regulators(7 LDOs)
Power Mux Switch
1.8V Input: 200 mΩ(Max)
3.3V Input: 280 mΩ(Max)
32.768 kHz Crystal Oscillator Driver
Power Button Detector
Protection and Monitoring: Soft Start, Power Rails Fault Detection, UVLO, OVP and TSD
OTP Configurable Power Sequencing
OTP and Software Programmable Output Voltage, Ramp rates.
Hardware Signaling with SoC for Transition into or out of Low Power States
Interfaces:
I2C: 100 kHz/400 kHz, 1 MHz
Power-on Reset Output: POR_B, RTC_RESET_B,
Watchdog Reset Input: WDOG_B:
Power State Control: PMIC_STBY_REQ, PMIC_ON_REQ, PWRON_B
Interrupt to SoC: IRQ_B
Type3 PCB Applicable

Specifications

Channel(DCDC)[ch] 8
SW frequency(Max.)[MHz] 2
Channel(LDO)[ch] 7
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 105
Package Size [mm] 8x8 (t=1)

Last 6 months Inventory & Pricing History


Resources







Package Information
Package Information

Manufacturing Data
Factory Information

Alternative Descriptions

POWER MANAGEMENT IC, -40 TO 85DEG C | element14
Power Management Ic, -40 To 85Deg C | Newark Electronics


Frequently Asked Questions

Where can I find additional details, specifications and documents for a BD71837AMWV-E2?

Additional datasheets, footprints and schematics for BD71837AMWV-E2 are listed on our Part Details page. You can also find images and similar parts to BD71837AMWV-E2 on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for BD71837AMWV-E2 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view BD71837AMWV-E2 price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does BD71837AMWV-E2 fall under?

The BD71837AMWV-E2 is listed under Semiconductors - ICs > Power Management ICs - PMIC > Multi Function Power Management ICs.

Can I view similar or alternative parts?

You can view similar parts to BD71837AMWV-E2 when available in the Multi Function Power Management ICs range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the BD71837AMWV-E2 you can contact the distributor directly for product support, shipping queries etc.

Is the BD71837AMWV-E2 RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by ROHM Semiconductor.

Which authorised distributors for BD71837AMWV-E2 have stock available?

Authorised distributors including element14, Farnell, CoreStaff, Newark Electronics and Avnet Asia have stock available or on a lead time for BD71837AMWV-E2.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for BD71837AMWV-E2 often in real-time on the comparison pages.

What if I can't find stock of BD71837AMWV-E2?

You can fill out our help required form which you can use to request a quote for BD71837AMWV-E2 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.