BD71847AMWV-E2 Power Management ICs - PMIC by Rohm

System PMIC for i.MX 8M Mini Family


BD71847AMWV integrates all power rails required by i.MX 8M Mini processors and system peripherals. In addition to integrate a sequencer compatible with power modes supported by i.MX 8M Mini processors, making it possible to significantly reduce the development time, decrease size, and simplify application design. The power supply circuit of the BD71847AMWV, designed specifically for the power supply system of the i.MX 8M Mini processor family, integrates an 6 buck converters, 6 LDOs, and control logic that allows it to supply power not only to the processor, but the required DDR memory as well – all from a single chip. A 1.8V/3.3V power switch for SDXC cards is also built in, along with a 32.768kHz crystal oscillator driver and multiple protection circuits such as output short-circuit, output over-voltage/current, and thermal shutdown. Buck conversion efficiency from 83 to 95% is achieved for 0.7V to 3.3V output, and the wide input voltage range from 2.7V to 5.5V supports a variety of power sources, from batteries to USB, making them ideal for i.MX 8M Mini applications. Furthermore, when single-sided mounting and Type-3 PCB is assumed, 42 fewer parts are needed compared with discrete solutions, reducing PCB area by up to 42%.

Where to Buy

Prices starting from US$2.11

Distributor Stock
Logo for CoreStaff
CoreStaff
from US$4.81
1,250
in stock
Buy Now
Logo for Newark
Newark Electronics
from US$2.45
0
in stock
Buy Now
Logo for Future Electronics NA
Future Electronics
from US$2.11
0
in stock
Buy Now
Logo for element14 Singapore
element14
from US$3.15
0
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$2.61
0
in stock
Buy Now
Logo for Avnet Asia
Avnet Asia
-
0
in stock
Buy Now
Logo for Avnet Silica
Avnet Silica
-
0
in stock
Buy Now
Logo for TTI Asia
TTI Asia
-
0
in stock
Buy Now
Buy Now

Features

6 Buck Regulators
2.0 MHz Switching Frequency. (BUCK1, BUCK2, BUCK5, BUCK7, and BUCK8).
1.5MHz Switching Frequency. (BUCK6)
Target Efficiency: 83% to 95%.
6ch Linear Regulators (6 LDOs)
Power Mux Switch
1.8V/3.3V Input: 500 mΩ(Max)
32.768 kHz Crystal Oscillator Driver
Power Button Detector
Protection and Monitoring: Soft Start, Power Rails Fault Detection, UVLO, OVP and TSD
OTP Configurable Power Sequencing
OTP and Software Programmable Output Voltage, Ramp rates.
Hardware Signaling with SoC for Transition into or out of Low Power States
Interfaces:
I2C: 100 kHz/400 kHz, 1 MHz
Power-on Reset Output: POR_B, RTC_RESET_B,
Watchdog Reset Input: WDOG_B:
Power State Control: PMIC_STBY_REQ, PMIC_ON_REQ, PWRON_B
Interrupt to SoC: IRQ_B
Type3 PCB Applicable

Specifications

Channel(DCDC)[ch] 6
SW frequency(Max.)[MHz] 2
Channel(LDO)[ch] 6
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 105
Package Size [mm] 7x7 (t=1)

Last 6 months Inventory & Pricing History


Resources







Package Information
Package Information

Manufacturing Data
Factory Information

Alternative Descriptions

Power Management Ic, -40 To 85Deg C | Newark Electronics
BD71847 Series 5.5 V 147 µA Surface Mount Power Management Integrated Circuit | Future Electronics
POWER MANAGEMENT IC, UQFN-56 | element14
PWR MANAGEMENT IC | TTI Asia


Frequently Asked Questions

Where can I find additional details, specifications and documents for a BD71847AMWV-E2?

Additional datasheets, footprints and schematics for BD71847AMWV-E2 are listed on our Part Details page. You can also find images and similar parts to BD71847AMWV-E2 on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for BD71847AMWV-E2 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view BD71847AMWV-E2 price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does BD71847AMWV-E2 fall under?

The BD71847AMWV-E2 is listed under Semiconductors - ICs > Power Management ICs - PMIC > Multi Function Power Management ICs.

Can I view similar or alternative parts?

You can view similar parts to BD71847AMWV-E2 when available in the Multi Function Power Management ICs range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the BD71847AMWV-E2 you can contact the distributor directly for product support, shipping queries etc.

Is the BD71847AMWV-E2 RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by ROHM Semiconductor.

Which authorised distributors for BD71847AMWV-E2 have stock available?

Authorised distributors including CoreStaff, Newark Electronics, Future Electronics, element14 and Farnell have stock available or on a lead time for BD71847AMWV-E2.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for BD71847AMWV-E2 often in real-time on the comparison pages.

What if I can't find stock of BD71847AMWV-E2?

You can fill out our help required form which you can use to request a quote for BD71847AMWV-E2 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.