C1206F104K1RACTU Capacitors by KEMET

CAP 0.1µF 100V 10% X7R 1206

Passive Components
> Capacitors
> Ceramic Capacitors
> SMD Ceramic Multilayer MLCC Capacitors
Status: Unknown
Series: F Series FO-CAP
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
KEMET’s Ceramic Open Mode capacitor in X7R dielectric is designed to significantly minimize the probability of a low IR or short circuit condition when forced to failure in a board stress flex situation, thus reducing the potential for catastrophic failure. The Open Mode capacitor may experience a drop in capacitance; however, a short is unlikely because a crack will not typically propagate across counter electrodes within the device’s “active area.” Since there will not be any current leakage associated with a typical Open Mode flex crack, there is no localized heating and therefore little chance for a catastrophic and potentially costly failure event. Driven by the demand for a more robust and reliable component, the Open Mode capacitor was designed for critical applications where higher operating temperatures and mechanical stress are a concern. These capacitors are widely used in automotive circuits as well as power supplies (input and output filters) and general electronic applications. Concerned with flex cracks resulting from excessive tensile and shear stresses produced during board flexure and thermal cycling? These devices are available with KEMET's Flexible termination technology which inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Although flexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems. When combined with flexible termination technology these devices offer the ultimate level of protection against a low IR or short circuit condition. Open Mode devices compliment KEMET's Floating Electrode (FE-CAP) and Floating Electrode with Flexible Termination (FF-CAP) product lines by providing a fail-safe design optimized for mid to high range capacitance values. These devices exhibit a predictable change in capacitance with respect to time and voltage and boast a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to ±15% from -55°C to +125°C.

Where to Buy

Prices starting from US$0.06

Distributor Stock
Logo for TTI Europe
TTI Europe
from US$0.13
48,000
in stock
 Buy Now
Logo for TTI Asia
TTI Asia
from US$0.06
24,000
in stock
 Buy Now
Logo for Newark
Newark Electronics
from US$0.20
5,572
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$0.19
5,572
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$0.17
5,572
in stock
 Buy Now
Logo for RS UK
RS
from US$0.09
825
in stock
 Buy Now
Logo for Avnet America
Avnet America
from US$0.11
0
in stock
 Buy Now
Logo for TME
TME
from US$0.12
0
in stock
 Buy Now
Logo for RS Americas
RS Americas
from US$0.30
0
in stock
 Buy Now
Logo for TTI Americas
TTI Americas
from US$0.10
0
in stock
 Buy Now
Buy Now

Specifications

Capacitance 0.1µF
Voltage Rating 100V
Ceramic Capacitor Case 1206 [3216 Metric]
Capacitance Tolerance ± 10%
Dielectric Characteristic X7R
Product Range F Series FO-CAP
Operating Temperature Min -55°C
Operating Temperature Max 125°C
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Last 6 months Inventory & Pricing History

Alternative Descriptions

.1UF 100V 10% 1206 | TTI Europe
.1UF 100V 10% 1206 | TTI Asia
Multilayer Ceramic Capacitor, F Series, 0.1 - F, - 10%, X7R, 100 V, 1206 [3216 Metric] Rohs Compliant: Yes |Kemet C1206F104K1RACTU | Newark Electronics
CAP, 0.1µF, 100V, 10%, X7R, 1206 | element14
KEMET C1206F104K1RACTU | RS
SMD Multilayer Ceramic Capacitor, 0.1 uF, 100 V, 1206 [3216 Metric], ? 10%, X7R | Avnet America
Capacitor: ceramic | TME
CAPACITOR | RS Americas

Frequently Asked Questions

Where can I find additional details, specifications and documents for a C1206F104K1RACTU?

Additional datasheets, footprints and schematics for C1206F104K1RACTU are listed on our Part Details page. You can also find images and similar parts to C1206F104K1RACTU on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for C1206F104K1RACTU on our Product Comparison page. Access via the 'View Pricing & Stock' button to view C1206F104K1RACTU price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does C1206F104K1RACTU fall under?

The C1206F104K1RACTU is listed under Electronic & Electrical Components > Capacitors > Ceramic Capacitors.

Can I view similar or alternative parts?

You can view similar parts to C1206F104K1RACTU when available in the Ceramic Capacitors range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the C1206F104K1RACTU you can contact the distributor directly for product support, shipping queries etc.

Is the C1206F104K1RACTU RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for C1206F104K1RACTU have stock available?

Authorised distributors including TTI Europe, TTI Asia, Newark Electronics, element14 and Farnell have stock available or on a lead time for C1206F104K1RACTU.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for C1206F104K1RACTU often in real-time on the comparison pages.

What if I can't find stock of C1206F104K1RACTU?

You can fill out our help required form which you can use to request a quote for C1206F104K1RACTU from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.