DSPIC33FJ12GP201-I/P Digital Signal Controllers - DSC by Microchip Technology
| Status: | Active |
|---|---|
| Series: | dsPIC33FJ12GP201 |
| RoHS: | Compliant |
Features
| Operating Range |
|---|
| Up to 40 MIPS operation (at 3.0-3.6V) |
| Industrial temperature range (-40°C to +85°C) |
| Extended temperature range (-40°C to +125°C) |
| High-Performance dsPIC33F core |
|---|
| Modified Harvard architecture |
| C compiler optimized instruction set |
| 16-bit wide data path, 24-bit wide instructions |
| Linear program memory addressing up to 4M instruction words |
| Linear data memory addressing up to 64 Kbytes |
| 83 base instructions, mostly one word/one cycle |
| Sixteen 16-bit general purpose registers |
| Two 40-bit accumulators with rounding and saturation options |
| Flexible and powerful addressing modes: - Indirect - Modulo - Bit-Reversed |
| Software stack |
| 16 x 16 fractional/integer multiply operations |
| 32/16 and 16/16 divide operations |
| Single-cycle MAC with accumulator write back for DSP operations and dual data fetch |
| Up to ±16-bit shifts for up to 40-bit data |
| Interrupt Controller |
|---|
| 5-cycle latency |
| Up to 21 available interrupt sources |
| Up to three external interrupts |
| Seven programmable priority levels |
| Four processor exceptions |
| On-Chip Flash and SRAM |
|---|
| Flash program memory (12 Kbytes) |
| Data SRAM (1024 bytes) |
| Boot and General Security for Program Flash |
| Digital I/O |
|---|
| Peripheral Pin Select Functionality |
| Up to 21 programmable digital I/O pins |
| Wake-up/interrupt-on-change for up to 21 pins |
| Output pins can drive from 3.0V to 3.6V |
| Up to 5V output with open drain configurations on 5V tolerant pins |
| 4 mA sink on all I/O pins |
| System Management |
|---|
| Flexible clock options: - External, crystal, resonator, internal RC - Fully Integrated Phase-Locked Loop (PLL) - Extremely low-jitter PLL |
| Power-up Timer |
| Oscillator Start-up Timer/Stabilizer |
| Watchdog Timer with its own RC oscillator |
| Fail-Safe Clock Monitor |
| Power Management |
|---|
| On-chip 2.5V voltage regulator |
| Switch between clock sources in real time |
| Idle, Sleep and Doze modes with fast wake-up |
| Timers/Capture/Compare |
|---|
| Up to three 16-bit timers which can pair up to make one 32-bit timer |
| Input Capture (up to four channels): - Capture on up, down, or both edges |
| 16-bit capture input functions, 4-deep FIFO on each capture |
| Output Compare (up to two channels) with Single or Dual 16-bit Compare mode |
| Communication Modules |
|---|
| 4-wire SPI: - Framing supports I/O interface to simple codecs, supports 8-bit and 16-bit data and supports all serial clock formats and sampling modes |
| I2C™: - Full Multi-Master Slave mode support, 7-bit and 10-bit addressing, bus collision detection and arbitration, slave address masking and integrated signal conditioning |
| UART: - Provides LIN bus support, IrDA® encoding and decoding in hardware, High-Speed Baud Mode and Hardware Flow Control with CTS and RTS |
| Analog-to-Digital Converters (ADCs) |
|---|
| ADC with 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion |
| Two and four simultaneous samples (10-bit ADC) |
| Up to 10 input channels with auto-scanning |
| Conversion start can be manual or synchronized with one of four trigger sources |
| Conversion possible in Sleep mode |
| ±2 LSb max integral nonlinearity |
| ±1 LSb max differential nonlinearity |
| Packaging |
|---|
| 18-pin PDIP/SOIC |
| 28-pin SPDIP/SOIC/SSOP/QFN |
Specifications
| Architecture | 16 |
|---|---|
| MaxSpeed (MHz) | 40 |
| CPU Speed (MIPS/DMIPS) | 40 |
| Program Memory Size (KB) | 12 |
| Multiple Flash Panels | False |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 125 |
| Operation Voltage Min.(V) | 3 |
| Operation Voltage Max.(V) | 3.6 |
| Pin Count | 20 |
| Low Power | No |
| Number of Comparators | 0 |
| Number of ADCs | 1 |
| ADC Channels | 6 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 1100 |
| Number of DACs | 0 |
| DAC outputs | 0 |
| Max DAC Resolution (bits) | 0 |
| Hardware RTCC | No |
| Motor Control PWM Channels | 0 |
| SMPS PWM Channels | 0 |
| Number of PWM Time Bases | 2 |
| Output Compare Channels | 4 |
| USB Interface | None |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| Crypto Engine | No |
| Quadrature Encoder Interface (QEI) | 0 |
| Segment LCD | 0 |
| LCD/Graphics Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) | 0 |
| Peripheral Pin Select (PPS)/Pin Muxing | Yes |
| Pins | Packaging | 18 | PDIP |
| Temp Range | -40C to +85C |
| Packing Media | Tube (25) |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| dsPIC33FJ12GP201/202 Data Sheet |
Brochures |
|---|
| 16-bit Embedded Control Solutions Brochure |
| Electronic Solutions for Medical and Fitness |
| MPLAB® X IDE Product Overview |
Programming Specifications |
|---|
| 16-Bit MCU and DSC Programmer's Reference Manual |
| dsPIC33F/PIC24H Flash Programming Specification |
Supporting Collateral |
|---|
| In-Circuit Debugging Interface Options with dsPIC DSC |
| TB3008, PLL Jitter and its Effects on ECAN Technology Protocol |
User Guides |
|---|
| Graphics Display Powertip 4.3" 480x272 Board |
| Graphics Display Truly 3.2" 240x320 Board |
| Graphics LCD Controller PICtail Plus SSD1926 Board |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 1.248 |
| Shipping Weight (kg) | 2.2 |
| Lead Count | 18 |
| Package Type | PDIP |
| Package Width or Size | .300in |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| DSC 16bit | ECOM |
| dsPIC33F Series 1 kB RAM 12 kB Flash 16-Bit Digital Signal Controller - PDIP-18 | Future Electronics |
| MCU 16-bit dSPIC33 dsPIC RISC 12KB Flash 3.3V 18-Pin PDIP Tube | Avnet America |
| 18 PIN, 12KB FLASH, 1KB RAM, 40 MIPS, 13 I/O 16 BIT MCU, NANOWATT | Microchip Technology |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a DSPIC33FJ12GP201-I/P?
Additional datasheets, footprints and schematics for DSPIC33FJ12GP201-I/P are listed on our Part Details page. You can also find images and similar parts to DSPIC33FJ12GP201-I/P on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for DSPIC33FJ12GP201-I/P on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DSPIC33FJ12GP201-I/P price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does DSPIC33FJ12GP201-I/P fall under?
The DSPIC33FJ12GP201-I/P is listed under Semiconductors - ICs > Digital Signal Controllers - DSC.
Can I view similar or alternative parts?
You can view similar parts to DSPIC33FJ12GP201-I/P when available in the Digital Signal Controllers - DSC range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the DSPIC33FJ12GP201-I/P you can contact the distributor directly for product support, shipping queries etc.
Is the DSPIC33FJ12GP201-I/P RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for DSPIC33FJ12GP201-I/P have stock available?
Authorised distributors including ECOM, Future Electronics, Avnet America, Microchip Technology and Avnet Silica have stock available or on a lead time for DSPIC33FJ12GP201-I/P.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for DSPIC33FJ12GP201-I/P often in real-time on the comparison pages.
What if I can't find stock of DSPIC33FJ12GP201-I/P?
You can fill out our help required form which you can use to request a quote for DSPIC33FJ12GP201-I/P from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.