DSPIC33FJ32MC202-I/MM More Semiconductors - ICs by Microchip Technology
16-bit DSC for Precision Motor Control
| Status: | Active |
|---|---|
| Series: | dsPIC33FJ32MC202 |
| RoHS: | Compliant |
Where to Buy
Prices starting from US$1.18
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$3.65
|
160
in stock
|
Buy Now |
|
RS Americas
from US$1.18
|
11
in stock
|
Buy Now |
|
Newark Electronics
from US$4.30
|
0
in stock
|
Buy Now |
|
Future Electronics
from US$4.44
|
0
in stock
|
Buy Now |
|
Avnet America
from US$4.44
|
0
in stock
|
Buy Now |
|
TME
from US$4.42
|
0
in stock
|
Buy Now |
|
Farnell
from US$3.18
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
Features
| Operating Range: |
|---|
| Up to 40 MIPS operation (@ 3.0-3.6V) |
| Industrial temperature range (-40°C to +85°C) |
| Extended temperature range (-40°C to +125°C) |
| High temperature range (-40°C to +150°C) |
| High-Performance DSC CPU: |
|---|
| Modified Harvard architecture |
| C compiler optimized instruction set |
| 16-bit wide data path |
| 24-bit wide instructions |
| Linear program memory addressing up to 4M instruction words |
| Linear data memory addressing up to 64 Kbytes |
| 83 base instructions: mostly 1 word/1 cycle |
| Two 40-bit accumulators with rounding and saturation options |
| Flexible and powerful addressing modes: Indirect, Modulo and Bit-reversed software stack |
| 16 x 16 fractional/integer multiply operations |
| 32/16 and 16/16 divide operations |
| Single-cycle multiply and accumulate: |
| Accumulator write back for DSP operations |
| Dual data fetch |
| Up to ±16-bit shifts for up to 40-bit data |
| Timers/Capture/Compare/PWM: |
|---|
| Timer/Counters, up to three 16-bit timers |
| Can pair up to make one 32-bit timer, 1 timer runs as Real-Time Clock with external 32.768 kHz oscillator, and Programmable prescaler |
| Input Capture (up to 4 channels): Capture on up, down or both edges, 16-bit capture input functions and 4-deep FIFO on each capture |
| Output Compare (up to 2 channels): Single or Dual 16-Bit Compare mode and 16-bit Glitchless PWM mode |
| Interrupt Controller: |
|---|
| 5-cycle latency, 118 interrupt vectors, Up to 26 available interrupt sources |
| Up to 3 external interrupts, 7 programmable priority levels, and 4 processor exceptions |
| Digital I/O: |
|---|
| Peripheral pin Select functionality |
| Up to 35 programmable digital I/O pins |
| Wake-up/Interrupt-on-Change for up to 21 pins |
| Output pins can drive from 3.0V to 3.6V |
| Up to 5V output with open drain configuration |
| All digital input pins are 5V tolerant |
| 4 mA sink on all I/O pins |
| On-Chip Flash and SRAM: |
|---|
| Flash program memory (up to 32 Kbytes) |
| Data SRAM (2 Kbytes) |
| Boot and General Security for program Flash |
| System Management: |
|---|
| Flexible clock options: External, crystal, resonator, internal RC |
| Fully integrated Phase-Locked Loop (PLL) and Extremely low jitter PLL |
| Power-up Timer |
| Oscillator Start-up Timer/Stabilizer |
| Watchdog Timer with its own RC oscillator |
| Fail-Safe Clock Monitor |
| Reset by multiple sources |
| Power Management: |
|---|
| On-chip 2.5V voltage regulator |
| Switch between clock sources in real time |
| Idle, Sleep and Doze modes with fast wake-up |
| Motor Control Peripherals: |
|---|
| 6-channel 16-bit Motor Control PWM |
| 3 duty cycle generators |
| Independent or Complementary mode |
| Programmable dead time and output polarity |
| Edge-aligned or center-aligned |
| Manual output override control |
| 1 Fault input |
| Trigger for ADC conversions |
| PWM frequency for 16-bit resolution (@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode |
| PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode |
| 2-channel 16-bit Motor Control PWM: |
| 1 duty cycle generator |
| Independent or Complementary mode |
| Programmable dead time and output polarity |
| Edge-aligned or center-aligned |
| Manual output override control |
| 1 Fault input |
| Trigger for ADC conversions |
| PWM frequency for 16-bit resolution (@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode |
| PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode |
| Quadrature Encoder Interface module: |
| Phase A, Phase B and index pulse input |
| 16-bit up/down position counter |
| Count direction status |
| Position Measurement (x2 and x4) mode |
| Programmable digital noise filters on inputs |
| Alternate 16-bit Timer/Counter mode |
| Interrupt on position counter rollover/underflow |
| Analog-to-Digital Converters (ADCs): |
|---|
| 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion |
| 2 and 4 simultaneous samples (10-bit ADC) |
| Up to 6 input channels with auto-scanning |
| Conversion start can be manual or synchronized with 1 of 4 trigger sources |
| Conversion possible in Sleep mode |
| ±2 LSb max integral nonlinearity |
| ±1 LSb max differential nonlinearity |
| CMOS Flash Technology: |
|---|
| Low-power, high-speed Flash technology |
| Fully static design |
| 3.3V (±10%) operating voltage |
| Industrial and Extended temperature |
| Low power consumption |
| Communication Modules: |
|---|
| 4-wire SPI: |
| Framing supports I/O interface to simple codecs |
| Supports 8-bit and 16-bit data |
| Supports all serial clock formats and sampling modes |
| I2C™: Full Multi-Master Slave mode support |
Specifications
| CPU Type | dsPIC® DSC |
|---|---|
| CPU Speed (MHz) | 40 |
| Program Memory Size (KB) | 32 |
| Multiple Flash Panels | False |
| Temp. Range Min.(C°) | -40 |
| Temp. Range Max.(C°) | 150 |
| Operation Voltage Min.(V) | 3 |
| Operation Voltage Max.(V) | 3.6 |
| Pin Count | 28 |
| Low Power | No |
| Number of Comparators | 0 |
| Number of ADCs | 1 |
| ADC Channels | 6 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 1100 |
| Number of DACs | 0 |
| DAC outputs | 0 |
| Max DAC Resolution (bits) | 0 |
| Hardware RTCC | No |
| Motor Control PWM Channels | 8 |
| SMPS PWM Channels | 0 |
| Number of PWM Time Bases | 3 |
| Output Compare Channels | 4 |
| USB Interface | None |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| Crypto Engine | No |
| Quadrature Encoder Interface (QEI) | 1 |
| Segment LCD | 0 |
| LCD/Graphics Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) | 0 |
| Peripheral Pin Select (PPS)/Pin Muxing | Yes |
| Pins | Packaging | 28 | QFN-S |
| Temp Range | -40C to +85C |
| Packing Media | Tube (61) |
Last 6 months Inventory & Pricing History
Resources
Brochures |
|---|
| 16-bit Embedded Control Solutions Brochure |
| Motor Control and Drive Brochure |
| Electronic Solutions for Medical and Fitness |
| MPLAB® X IDE Product Overview |
Miscellaneous |
|---|
| dsPIC33FJ32MC204 PIM Information Sheet |
Programming Specifications |
|---|
| 16-Bit MCU and DSC Programmer's Reference Manual |
| dsPIC33F/PIC24H Flash Programming Specification |
User Guides |
|---|
| Graphics Display Powertip 4.3" 480x272 Board |
| Graphics Display Truly 3.2" 240x320 Board |
| Graphics LCD Controller PICtail Plus SSD1926 Board |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.1016 |
| Shipping Weight (kg) | 0.163934 |
| Lead Count | 28 |
| Package Type | QFN-S |
| Package Width or Size | 6x6x0.9mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| 28-pin, 32KB, Flash, 2048bytes-RAM, 40MIPS, 21I/O, 16-bit Family | Microchip Technology |
| 16-BIT DSC, 28LD,32KB FLASH, MOTOR,40 MIPS, NANOWATT | RS Americas |
| Digital Signal Controller-Dsc, 16 Bit, 32Kb, 40Mhz, 3.6V Qfn-28 | Newark Electronics |
| dsPIC33F Series 2 kB RAM 32 kB Flash 16-Bit Digital Signal Controller - QFN-S28 | Future Electronics |
| MCU 16-bit dSPIC33 dsPIC RISC 32KB Flash 3.3V 28-Pin QFN-S EP Tube | Avnet America |
| IC: dsPIC microcontroller | TME |
| DSC, 32BIT, 80MHZ, 32KB, 3.6V, QFN-28 | Farnell |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a DSPIC33FJ32MC202-I/MM?
Additional datasheets, footprints and schematics for DSPIC33FJ32MC202-I/MM are listed on our Part Details page. You can also find images and similar parts to DSPIC33FJ32MC202-I/MM on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for DSPIC33FJ32MC202-I/MM on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DSPIC33FJ32MC202-I/MM price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does DSPIC33FJ32MC202-I/MM fall under?
The DSPIC33FJ32MC202-I/MM is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to DSPIC33FJ32MC202-I/MM when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the DSPIC33FJ32MC202-I/MM you can contact the distributor directly for product support, shipping queries etc.
Is the DSPIC33FJ32MC202-I/MM RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for DSPIC33FJ32MC202-I/MM have stock available?
Authorised distributors including Microchip Technology, RS Americas, Newark Electronics, Future Electronics and Avnet America have stock available or on a lead time for DSPIC33FJ32MC202-I/MM.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for DSPIC33FJ32MC202-I/MM often in real-time on the comparison pages.
What if I can't find stock of DSPIC33FJ32MC202-I/MM?
You can fill out our help required form which you can use to request a quote for DSPIC33FJ32MC202-I/MM from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.