EX-Z13FB-R Industrial Sensors by Panasonic
| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
Specifications
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
|---|---|
| Output Operation | Dark-ON |
| Sensing Range | 500 mm 19.685 in |
| Min. Sensing Object | ø1.0 mm ø0.039 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 500 mm 19.685 in ) |
| Repeatability (Perpendicular to Sensing Axis) | 0.05 mm 0.002 in or less |
| Supply Voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Current Consumption | Emitter: 10 mA or less Receiver: 10 mA or less |
| Output | NPN open-collector transistor - Maximum sink current: 20 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 20 mA sink current) |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 0.5 ms or less |
| Operation Indicator | Orange LED (Lights up when the sensing output is ON) |
| Stability Indicator | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| Protection | IP67 (IEC) |
| Ambient Temperature | -10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 5,000 â„“x at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each |
| Emitting Element | Red LED (Peak emission wavelength: 650 nm 0.026 mil , modulated) |
| Grounding | Floating |
| Material | Enclosure: PBT Lens: Polycarbonate Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| Cable | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long. |
| Cable Extension | Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| Weight (Typ.) | Net weight (each emitter and receiver) : 15 g approx. Gross weight: 35 g approx. |
| Accessory | M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length) |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉ . |
Last 6 months Inventory & Pricing History
Alternative Descriptions
| Photoelectric Sensor, 500Mm, Npn | Newark Electronics |
| PHOTOELECTRIC SENSOR, 500MM, NPN | element14 |
| Einweglichtschranke, 0,5 m, NPN, 12-24 VDC, Kabelanschluss, IP67, EX-Z13FB-R | Buerklin |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a EX-Z13FB-R?
Additional datasheets, footprints and schematics for EX-Z13FB-R are listed on our Part Details page. You can also find images and similar parts to EX-Z13FB-R on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for EX-Z13FB-R on our Product Comparison page. Access via the 'View Pricing & Stock' button to view EX-Z13FB-R price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does EX-Z13FB-R fall under?
The EX-Z13FB-R is listed under Industrial Automation > Industrial Sensors > Photoelectric Sensors / Laser Sensors > Ultra-minute Photoelectric Sensor EX-Z.
Can I view similar or alternative parts?
You can view similar parts to EX-Z13FB-R when available in the Ultra-minute Photoelectric Sensor EX-Z range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the EX-Z13FB-R you can contact the distributor directly for product support, shipping queries etc.
Is the EX-Z13FB-R RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for EX-Z13FB-R have stock available?
Authorised distributors including Newark Electronics, element14, Buerklin and Farnell have stock available or on a lead time for EX-Z13FB-R.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for EX-Z13FB-R often in real-time on the comparison pages.
What if I can't find stock of EX-Z13FB-R?
You can fill out our help required form which you can use to request a quote for EX-Z13FB-R from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.