FOD8480R2 High Performance Optocouplers by ON Semiconductor

Optically Isolated Intelligent Power Module (IPM) Driver in Stretched Body SOP 6-Pin

Status: Active
Series: FOD8480
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages. The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminum gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor. The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum. For the complete FOD848x Series, the Electrical and Switching Characteristics are guaranteed over the extended industrial temperature range of −40°C to 100°C and a VDD range of 4.5 V to 30 V. Low IF and wide VDD range allow compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed optocouplers.

Where to Buy

Prices starting from US$0.69

Distributor Stock
Logo for Flip Electronics
Flip Electronics
from US$0.69
98,000
in stock
Buy Now
Logo for Newark
Newark Electronics
from US$1.03
0
in stock
Buy Now
Logo for Avnet America
Avnet America
from US$1.00
0
in stock
Buy Now
Logo for TME
TME
from US$1.39
0
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$1.08
0
in stock
Buy Now
Logo for Avnet Silica
Avnet Silica
-
0
in stock
Buy Now
Buy Now

Features

Maximum Threshold Input Current, IFLH, ♦ FOD8480 – 5.5 mA ♦ FOD8482 – 3.0 mA
FOD8480T and FOD8482T - 8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High Voltage Insulation
High Noise Immunity Characterized by Common Mode Transient Immunity (CMTI) – 20 kV/µs Minimum CMTI
Specifications Guaranteed Over Extended Industrial Temperature Range, -40°C to 100°C
Wide Operating Voltage Range, 4.5 V to 30 V
Safety and Regulatory Approvals – UL1577, 5,000 VACRMS for 1 Minute – DIN-EN/IEC60747-5-5, 1,140 V Peak Working Insulation Voltage
Applications
Isolating Intelligent Power Module
End Products
Isolating Industrial Communication Interface

Specifications

Description FOD8480, Stretched Body SOP 6-Pin, Tape and Reel (1,000 units pre reel)
Compliance Pb-free
Data Rate (Mbps) 1 Mb/s
VCC (Max) (V) 30
VCC (Min) (V) 4.5
Channels 1
IFT (Max) (mA) 5.5
VOL (Max) (V) 0.5
ICCL (Max) (mA) 2.5
tPHL (Max) (ns) 300
tPLH (Max) (ns) 300
PWD (Max) (ns) 250
CMR (Max) (kV/µs) 40
VISO (Min) (V) 5000
TOPR (Min) (°C) -40
TOPR (Max) (°C) 100
Package Type SOIC-6

Last 6 months Inventory & Pricing History


Alternative Descriptions

Optocoupler, 1Mbps, 5Kv, Ssop-6 | Newark Electronics
Optically Isolated Intelligent Power Module (IPM) Driver in Stretched Body SOP 6-Pin Stretched Body | Avnet America
Optocoupler | TME
OPTOCOUPLER, 1MBPS, 5KV, SSOP-6 | Farnell


Frequently Asked Questions

Where can I find additional details, specifications and documents for a FOD8480R2?

Additional datasheets, footprints and schematics for FOD8480R2 are listed on our Part Details page. You can also find images and similar parts to FOD8480R2 on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for FOD8480R2 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view FOD8480R2 price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does FOD8480R2 fall under?

The FOD8480R2 is listed under Interfaces > High Performance Optocouplers > High Speed Logic Gate Optocouplers.

Can I view similar or alternative parts?

You can view similar parts to FOD8480R2 when available in the High Speed Logic Gate Optocouplers range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the FOD8480R2 you can contact the distributor directly for product support, shipping queries etc.

Is the FOD8480R2 RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by ON Semiconductor.

Which authorised distributors for FOD8480R2 have stock available?

Authorised distributors including Flip Electronics, Newark Electronics, Avnet America, TME and Farnell have stock available or on a lead time for FOD8480R2.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for FOD8480R2 often in real-time on the comparison pages.

What if I can't find stock of FOD8480R2?

You can fill out our help required form which you can use to request a quote for FOD8480R2 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.