FX-101P-Z Industrial Sensors by Panasonic
| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
Where to Buy
Prices starting from US$79.46
| Distributor | Stock | ||
|---|---|---|---|
|
Newark Electronics
from US$125.37
|
8
in stock
|
Buy Now |
|
element14
from US$125.89
|
8
in stock
|
Buy Now |
|
Farnell
from US$112.06
|
8
in stock
|
Buy Now |
|
Conrad
from US$79.46
|
5
in stock
|
Buy Now |
|
RS
from US$114.85
|
4
in stock
|
Buy Now |
|
TME
from US$105.06
|
2
in stock
|
Buy Now |
|
|
RS Americas
from US$136.62
|
0
in stock
|
Buy Now |
| Buy Now |
Specifications
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
|---|---|
| Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Power Consumption | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA source current) |
| Output: Output Operation | Selectable either Light-ON or Dark-ON, at SET mode |
| Output: Short-Circuit Protection | Incorporated |
| External Input | PNP non-contact input - Signal condition High: +4 V to +V DC (Sink current 0.5 to 3 mA) Low: 0 to +0.6 V DC or Open - Input impedance: 10 kOhm approx. |
| Response Time | Emission frequency 0: 250 micro s or less (factory default setting) Emission frequency 1: 450 micro s or less Emission frequency 2: 500 micro s or less Emission frequency 3: 600 micro s or less |
| Sensitivity Setting | 2-point teaching / Limit teaching / Full-auto teaching |
| Operation Indicator | Orange LED (lights up when the output is ON) |
| Digital Display | 4 digits (green) + 4 digits (red) LCD display |
| Fine Sensitivity Adjustment Function | Incorporated |
| Timer Function | ON-delay / OFF-delay timer, switchable either effective or ineffective [Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Emission Amount Setting Function | 3-level + Auto setting (from production in December 2007) |
| Interference Prevention Function | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3) (Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| Ambient Temperature | –10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: –10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: –10 to +45 ℃ +14 to +113 ℉ ) (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Emitting Element (Modulated) | Red LED (Peak emission wavelength: 643 nm 0.025 mil ) |
| Material | Enclosure: Polycarbonate Key switch: Polycarbonate Fiber lock lever: PBT |
| Connecting Method | Connector (Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Cable Length | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight (Typ.) | Net weight: 15 g approx. Gross weight: 35 g approx. |
| Accessory | FC-FX-1(Protection cover): 1 pc. (Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Newark, An Avnet Company United States Tel. 1-800-4-NEWARK | 5 |
| Master Electronics United States Tel. 1-888-473-5297 | 4 |
| Onlinecomponents.com United States Tel. 1-702-462-7300 | 3 |
| Ramco Innovations - National United States Tel. 1-800-280-6933 | 1 |
| Digi-Key Electronics United States Tel. 1-800-344-4539 | 1 |
Last 6 months Inventory & Pricing History
Alternative Descriptions
| Sensor, Fibre Optic, Pnp, M8 Connector | Newark Electronics |
| SENSOR, FIBRE OPTIC, PNP, M8 CONNECTOR | element14 |
| Lichtwellenleiter-Verstärker, Serie FX100 Panasonic | Conrad |
| Panasonic FX-101P-Z Fibre Optic Sensor | RS |
| Sensor: optical fiber amplifier | TME |
| FIBER SENSOR, STANDARD PNP OUTPUT, M8 CONNECTOR TYPE | RS Americas |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a FX-101P-Z?
Additional datasheets, footprints and schematics for FX-101P-Z are listed on our Part Details page. You can also find images and similar parts to FX-101P-Z on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for FX-101P-Z on our Product Comparison page. Access via the 'View Pricing & Stock' button to view FX-101P-Z price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does FX-101P-Z fall under?
The FX-101P-Z is listed under Industrial Automation > Industrial Sensors > Fiber Sensors > Digital Fiber Sensor FX-100.
Can I view similar or alternative parts?
You can view similar parts to FX-101P-Z when available in the Digital Fiber Sensor FX-100 range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the FX-101P-Z you can contact the distributor directly for product support, shipping queries etc.
Is the FX-101P-Z RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for FX-101P-Z have stock available?
Authorised distributors including Newark Electronics, element14, Farnell, Conrad and RS have stock available or on a lead time for FX-101P-Z.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for FX-101P-Z often in real-time on the comparison pages.
What if I can't find stock of FX-101P-Z?
You can fill out our help required form which you can use to request a quote for FX-101P-Z from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.