HG-C1050-P Industrial Sensors by Panasonic
| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
Where to Buy
Prices starting from US$422.98
| Distributor | Stock | ||
|---|---|---|---|
|
RS
from US$969.73
|
0
in stock
|
Buy Now |
|
Rapid Electronics
from US$564.72
|
0
in stock
|
Buy Now |
|
TME
from US$441.40
|
0
in stock
|
Buy Now |
|
|
RS Americas
from US$439.60
|
0
in stock
|
Buy Now |
|
Conrad
from US$422.98
|
0
in stock
|
Buy Now |
|
Buerklin
from US$496.56
|
0
in stock
|
Buy Now |
|
Newark Electronics
-
|
0
in stock
|
Buy Now |
| Buy Now |
Specifications
| Applicable Standard | EMC Directive Compliance, FDA Standard |
|---|---|
| Measurement Center Distance | 50mm 1.969 in |
| Measuring Range | ±15mm 0.591 in |
| Repeatability | 30 μm 1.181 mil |
| Linearity | ±0.1%F.S. |
| Temperature Characteristics | 0.03% F.S. /℃ |
| Light Source | Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note) Max. output: 1mW emission peak wavelength: 655nm 0.026 mil (Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). |
| Beam Diameter | ø70 μm 1.1811 mil approx. (Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. |
| Supply Voltage | 12 to 24V DCplus or minus 10% Ripple P-P 10% |
| Current Consumption | 40 mA or less (at 24V DC supply voltage) 65 mA or less (at 12V DC supply voltage) Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) |
| Control Output | PNP open-collector transistor - Maximum source current: 50mA - Applied voltage: 30V DC or less (Between control output to +V) - Residual voltage: 1.5V or less (At 50mA source current) - Leakage current: 0.1 mA or less |
| Control Output: Output Operation | Either Light-ON or Dark-ON |
| Control Output: Short-Circuit Protection | Incorporated (Auto reset type) |
| Analogue Output: Analog Voltage Output | • Output range: 0 to 5 V (at alarm: +5.2 V) • Output impedance: 100Ω |
| Analogue Output: Analog Current Output | • Output range: 4 to 20mA (at alarm: 0mA) • Output impedance: 300Ω or less Note : Analog current output has been added from shipment in August 2016. |
| Response Time | Switchable between 1.5 ms / 5 ms / 10 ms |
| External Input | PNP non-contact input - Input conditions Invalid: 0 to +0.6V DC or Open Valid: +4 to +V DC - Input impedance: 10kΩ approx. |
| Pollution Degree | 2 |
| Operating Altitude | 2,000 m 6561.680 ft or less |
| Protection | IP67 (IEC) |
| Ambient Temperature | -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉ |
| Ambient Humidity | 35 to 85% RH, Storage: 35 to 85% RH |
| Ambient Illuminance | Incandescent light: 3,000 â„“x or less at the light-receiving face |
| Vibration Resistance | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Cable | 5-core composite cable, 2 m 6.5617 ft long |
| Cable Extension | Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable. |
| Material | Enclosure: Aluminum die-cast Front cover: Acrylic |
| Weight (Typ.) | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |
Last 6 months Inventory & Pricing History
Alternative Descriptions
| Panasonic HG-C1050-P Distance Sensor | RS |
| Panasonic HG-C1050-P Laser Rangefinder 50mm 24V DC 4-digit LED Display | Rapid Electronics |
| Sensor: distance | TME |
| MICRO LASER DISTANCE SENSOR, PNP,50+/-15MM | RS Americas |
| Panasonic HG-C1050-P Laser-Distanz-Sensor 1 St. 24 V/DC Reichweite max. (im Freifeld): 50 mm (L x B x H) 44 x 20 x 25 mm | Conrad |
| Laser-Abstandssensor, 0,05 m, PNP, 12-24 VDC, Kabelanschluss, IP67, HG-C1050-P | Buerklin |
| Laser Sensor, Pnp, 50Mm | Newark Electronics |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a HG-C1050-P?
Additional datasheets, footprints and schematics for HG-C1050-P are listed on our Part Details page. You can also find images and similar parts to HG-C1050-P on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for HG-C1050-P on our Product Comparison page. Access via the 'View Pricing & Stock' button to view HG-C1050-P price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does HG-C1050-P fall under?
The HG-C1050-P is listed under Industrial Automation > Industrial Sensors > Photoelectric Sensors / Laser Sensors > CMOS type Micro Laser Distance Sensor HG-C.
Can I view similar or alternative parts?
You can view similar parts to HG-C1050-P when available in the CMOS type Micro Laser Distance Sensor HG-C range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the HG-C1050-P you can contact the distributor directly for product support, shipping queries etc.
Is the HG-C1050-P RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for HG-C1050-P have stock available?
Authorised distributors including RS, Rapid Electronics, TME, RS Americas and Conrad have stock available or on a lead time for HG-C1050-P.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for HG-C1050-P often in real-time on the comparison pages.
What if I can't find stock of HG-C1050-P?
You can fill out our help required form which you can use to request a quote for HG-C1050-P from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.