HG-C1100 Industrial Sensors by Panasonic
| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
Where to Buy
Prices starting from US$404.07
| Distributor | Stock | ||
|---|---|---|---|
|
RS
from US$971.69
|
10
in stock
|
Buy Now |
|
Newark Electronics
from US$495.41
|
0
in stock
|
Buy Now |
|
TME
from US$446.35
|
0
in stock
|
Buy Now |
|
|
RS Americas
from US$474.80
|
0
in stock
|
Buy Now |
|
element14
from US$466.70
|
0
in stock
|
Buy Now |
|
Conrad
from US$441.66
|
0
in stock
|
Buy Now |
|
Buerklin
from US$462.96
|
0
in stock
|
Buy Now |
|
Farnell
from US$404.07
|
0
in stock
|
Buy Now |
| Buy Now |
Specifications
| Applicable Standard | EMC Directive Compliance, FDA Standard |
|---|---|
| Measurement Center Distance | 100mm 3.937 in |
| Measuring Range | ±35mm 1.328 in |
| Repeatability | 70 μm 2.756 mil |
| Linearity | ±0.1%F.S. |
| Temperature Characteristics | 0.03% F.S. /℃ |
| Light Source | Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note) Max. output: 1mW emission peak wavelength: 655nm 0.026 mil (Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). |
| Beam Diameter | ø120 μm 4.7241 mil approx. (Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. |
| Supply Voltage | 12 to 24V DCplus or minus 10% Ripple P-P 10% |
| Current Consumption | 40 mA or less (at 24V DC supply voltage) 65 mA or less (at 12V DC supply voltage) Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) |
| Control Output | NPN open-collector transistor - Maximum sink current: 50mA - Applied voltage: 30V DC or less (Between control output to 0V) - Residual voltage: 1.5V or less (At 50mA sink current) - Leakage current: 0.1 mA or less |
| Control Output: Output Operation | Either Light-ON or Dark-ON |
| Control Output: Short-Circuit Protection | Incorporated (Auto reset type) |
| Analogue Output: Analog Voltage Output | • Output range: 0 to 5 V (at alarm: +5.2 V) • Output impedance: 100Ω |
| Analogue Output: Analog Current Output | • Output range: 4 to 20mA (at alarm: 0mA) • Output impedance: 300Ω or less Note : Analog current output has been added from shipment in August 2016. |
| Response Time | Switchable between 1.5 ms / 5 ms / 10 ms |
| External Input | NPN non-contact input - Input conditions Invalid: +8 to +V DC or Open Valid: 0 to +1.2V DC - Input impedance: 10kΩ approx. |
| Pollution Degree | 2 |
| Operating Altitude | 2,000 m 6561.680 ft or less |
| Protection | IP67 (IEC) |
| Ambient Temperature | -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉ |
| Ambient Humidity | 35 to 85% RH, Storage: 35 to 85% RH |
| Ambient Illuminance | Incandescent light: 3,000 â„“x or less at the light-receiving face |
| Vibration Resistance | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Cable | 5-core composite cable, 2 m 6.5617 ft long |
| Cable Extension | Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable. |
| Material | Enclosure: Aluminum die-cast Front cover: Acrylic |
| Weight (Typ.) | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |
Last 6 months Inventory & Pricing History
Alternative Descriptions
| Panasonic HG-C1100 Distance Sensor | RS |
| Laser Distance Sensor, 35Mm, Digital Rohs Compliant: Yes |Panasonic HG-C1100 | Newark Electronics |
| Sensor: distance | TME |
| MICRO LASER DISTANCE SENSOR, NPN,100+/-35MM | RS Americas |
| LASER DISTANCE SENSOR, 35MM, DIGITAL | element14 |
| Panasonic HG-C1100 Laser-Distanz-Sensor 1 St. 24 V/DC Reichweite max. (im Freifeld): 100 mm (L x B x H) 44 x 20 x 25 mm | Conrad |
| Laser-Abstandssensor, 0,1 m, PNP, 12-24 VDC, Kabelanschluss, IP67, HG-C1100 | Buerklin |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a HG-C1100?
Additional datasheets, footprints and schematics for HG-C1100 are listed on our Part Details page. You can also find images and similar parts to HG-C1100 on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for HG-C1100 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view HG-C1100 price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does HG-C1100 fall under?
The HG-C1100 is listed under Industrial Automation > Industrial Sensors > Photoelectric Sensors / Laser Sensors > CMOS type Micro Laser Distance Sensor HG-C.
Can I view similar or alternative parts?
You can view similar parts to HG-C1100 when available in the CMOS type Micro Laser Distance Sensor HG-C range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the HG-C1100 you can contact the distributor directly for product support, shipping queries etc.
Is the HG-C1100 RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for HG-C1100 have stock available?
Authorised distributors including RS, Newark Electronics, TME, RS Americas and element14 have stock available or on a lead time for HG-C1100.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for HG-C1100 often in real-time on the comparison pages.
What if I can't find stock of HG-C1100?
You can fill out our help required form which you can use to request a quote for HG-C1100 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.