KSZ8842-16MQL More Semiconductors - ICs by Microchip Technology

2-Port 10/100 Managed Ethernet Switch

Status: Active
Series: KSZ8842
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The KSZ8842-series of 2-port switches includes PCI and non-PCI CPU interfaces.

The datasheet describes the KSZ8842-PMQL/PMBL PCI CPU interface chips. KSZ8842-PMQL is PQFP package chip, KSZ8842-PMBL is LFBGA package chip. For information on the KSZ8842-MQL/MBL CPU non-PCI interface switches, refer to the KSZ8842-MQL/MBL datasheet.

The KSZ8842-PMQL/PMBL is the industry's first fully managed 2-port switch with a 32-bit/33MHz PCI processor interface. It is a proven, 4th generation, integrated Layer 2 switch that is compliant with the IEEE 802.3u standard. An industrial temperature grade version of the KSZ8842-PMQL/PMBL, also can be ordered the KSZ8842-PMQLI/PMBL AM. The KSZ8842-PMQL/PMBL can be configured as a switch or as a low-latency (<310 nanoseconds) repeater in latency-critical, embedded or industrial Ethernet applications.

For industrial automation applications, the KSZ8842-PMQL/PMBL can run in half-duplex mode regardless of the application. The KSZ8842-PMQL/PMBL offers an extensive feature set that includes tag/port-based VLAN, quality of service (QoS) priority management, management information base (MIB) counters, and CPU control/data interfaces to effectively address Fast Ethernet applications. The KSZ8842-PMQL/PMBL contains two 10/100 transceivers with patented, mixed-signal, low-power technology three media access control (MAC) units, a direct memory access (DMA) channel, a high-speed, non-blocking, switch fabric, a dedicated 1K entry forwarding table, and an on-chip frame buffer memory.

Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Where to Buy

Prices starting from US$10.80

Distributor Stock
Logo for Newark
Newark Electronics
from US$13.84
0
in stock
Buy Now
Logo for Future Electronics NA
Future Electronics
from US$12.46
0
in stock
Buy Now
Logo for Avnet America
Avnet America
from US$11.96
0
in stock
Buy Now
Logo for Microchip Technology Inc
Microchip Technology
from US$10.80
0
in stock
Buy Now
Logo for element14 Singapore
element14
from US$17.56
0
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$12.92
0
in stock
Buy Now
Logo for EBV Elektronik
EBV Elektronik
-
0
in stock
Buy Now
Logo for Avnet Silica
Avnet Silica
-
0
in stock
Buy Now
Buy Now

Features

Non-blocking switch fabric assures fast packet delivery by utilizing a 1K entry MAC Address look-up engine and a store-and-forward architecture
Fully compliant with IEEE 802.3u standards
Full-duplex IEEE 802.3x flow control (Pause) with force mode option
Half-duplex back pressure flow control
IEEE 802.1Q VLAN support for up to 16 groups (full-range of VLAN IDs)
VLAN ID tag/untag options, per port basis
IEEE 802.1p/Q tag insertion or removal on a per-port basis (egress)
Programmable rate limiting at the ingress and egress port
Broadcast storm protection
IEEE 802.1d spanning tree protocol support
MAC filtering function to filter unicast packets
Unknown MAC address forwarding function
Direct forwarding mode enabling the processor to identify the ingress port and to specify the egress port
IGMP v1/v2 snooping support for multicast packet filtering
IPV6 Multicast Listener Discovery (MLD) snooping support
Management information base (MIB) counters for fully compliant statistics gathering: 32 MIB counters per port
Loop back modes for remote failure diagnostics
There are three kinds of register groups:
The PCI configuration registers are used to initialize and configure the PCI interface
The PCI control/status registers are used to communicate between the host and KSZ8842-PMQL/PMBL
Switch registers are used to support transceiver control and status. They are configurable on-the-fly (port-priority, 802.1p/d/Q, etc.)
Per port, 802.1p and DiffServ based
Re-mapping of 802.1p priority field on a per port basis
Full-chip hardware power-down (register configuration not saved) provides for low power dissipation
Per port-based software power-save on PHY (idle link detection, register configuration preserved)
Single power supply: 3.3V
Commercial Temperature Range: 0°C to +70°C
Industrial Temperature Range: -40°C to +85°C
Available in 128-pin PQFP and 100-ball LFBGA

Specifications

Ethernet Bandwidth 10/100Mbps
TX RX RAM Buffer 4KB
Interrupt Pin Yes
Op Voltage 3.3
# Ethernet Ports 3
Interface Host Bus/PCI
IOPins 0
IEEE1588 No
Temp Range Min -40
Temp Range Max 85
Turbo MII No
Dual MII Support No
Automotive Yes
# of Ether Ports 2
Managed Yes
Copper Support 10/100 (2)
Fiber Support No
MII No
RMII No
SMII No
SNI No
GMII No
RGMII No
SGMII No
8/16-bit Yes
32-bit Yes
PCI Yes
Supply Voltage (V) 3.3
Internal LDO Yes
Vdd I/O (V) 3.3/5.0
LinkMD Cable Diag Yes
Repeater Mode Yes
On-Chip Termination No
Pin-Pin With n/a
ESD Rating (KV) n/a
Smart Power Adjust n/a
WOL No
Largest Pkt-Size Bytes 1916
IPV6 Yes
# of VLAN 16
Flow Ctrl Yes
Rate Limiting Yes
Rapid Spanning Tree No
Static MAC Addr Yes
Pins | Packaging 128 | PQFP
Temp Range 0C to +70C
Packing Media Tray (66)

Last 6 months Inventory & Pricing History


Resources


Application Notes
AN1120 - Ethernet Theory of Operation
Micrel AN 3 - Driving Halogen Lamps - Driving Halogen Lamps
Micrel AN 8 - Interfacing the MIC2557/8 to PCMCIA Controllers - Interfacing the MIC2557/8 to PCMCIA Controllers
Micrel AN 140 - Programmable Guide & Supporting Software for KSZ88xxM GBI - Programmable Guide & Supporting Software for KSZ88xxM Generic Bus Interface
Micrel AN 157 - Optimized Power Scheme for High Efficiency, Low Power Consump. - Optimized Power Scheme for High Efficiency, Low Power Consumption and Dissipation
Micrel ANVoIP103 - IP-Based Emergency Systems - IP-Based Emergency Systems
Micrel WP - Ethernet over Plastic Optical Fibre - Ethernet over Plastic Optical Fibre
Micrel AN 115 - Fault LED Specification for Media Converter Applications - Fault LED Specification for Media Converter Applications
Micrel AN 120 - Capacitive Coupling Ethernet Transceivers without Transformers - Capacitive Coupling Ethernet Transceivers without Using Transformers
Micrel AN 138 - QoS Priority Support in the KSZ8842 Family
Micrel ANLAN207 - Management Interfaces for Micrel Switches - Management Interfaces for Micrel Switches
AN2157 - Transient Protection in Power Over Ethernet Applications
AN2686 - Ethernet Compliance Testing for 10BASE-T, 100BASE-TX, and 1000BASE-T



Environmental Information

JEDEC Indicator e3
ROHS Compliant
China EFUP Compliant
Device Weight (g) 1.7615
Shipping Weight (kg) 4.015152
Lead Count 128
Package Type PQFP
Package Width or Size 14x20x2.72mm
Soldering Composition Matte Tin

Alternative Descriptions

Ethernet Switch, 100Mbps, Pqfp-128 | Newark Electronics
2-Port Ethernet Switch Plus 8-16-Bit Generic Bus Interface - PQFP-128 | Future Electronics
2-Port 10/100 Switch/Repeater w/ Generic 8/16-bit Bus I/F | Microchip Technology
ETHERNET SWITCH, 100MBPS, PQFP-128 | element14


Frequently Asked Questions

Where can I find additional details, specifications and documents for a KSZ8842-16MQL?

Additional datasheets, footprints and schematics for KSZ8842-16MQL are listed on our Part Details page. You can also find images and similar parts to KSZ8842-16MQL on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for KSZ8842-16MQL on our Product Comparison page. Access via the 'View Pricing & Stock' button to view KSZ8842-16MQL price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does KSZ8842-16MQL fall under?

The KSZ8842-16MQL is listed under Semiconductors - ICs > More Semiconductors - ICs.

Can I view similar or alternative parts?

You can view similar parts to KSZ8842-16MQL when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the KSZ8842-16MQL you can contact the distributor directly for product support, shipping queries etc.

Is the KSZ8842-16MQL RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Microchip Technology.

Which authorised distributors for KSZ8842-16MQL have stock available?

Authorised distributors including Newark Electronics, Future Electronics, Avnet America, Microchip Technology and element14 have stock available or on a lead time for KSZ8842-16MQL.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for KSZ8842-16MQL often in real-time on the comparison pages.

What if I can't find stock of KSZ8842-16MQL?

You can fill out our help required form which you can use to request a quote for KSZ8842-16MQL from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.