| Status: | Active |
|---|---|
| Series: | KSZ8842 |
| RoHS: | Compliant |
Prices starting from US$12.68
| Distributor | Stock | ||
|---|---|---|---|
|
Future Electronics
from US$13.39
|
77
in stock
|
Buy Now |
|
Newark Electronics
from US$15.85
|
0
in stock
|
Buy Now |
|
Avnet America
from US$15.39
|
0
in stock
|
Buy Now |
|
TME
from US$16.88
|
0
in stock
|
Buy Now |
|
Microchip Technology
from US$12.68
|
0
in stock
|
Buy Now |
|
element14
from US$17.38
|
0
in stock
|
Buy Now |
|
Farnell
from US$15.78
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
| Non-blocking switch fabric assures fast packet delivery by utilizing a 1K entry MAC Address look-up engine and a store-and-forward architecture |
| Fully compliant with IEEE 802.3u standards |
| Full-duplex IEEE 802.3x flow control (Pause) with force mode option |
| Half-duplex back pressure flow control |
| IEEE 802.1Q VLAN support for up to 16 groups (full-range of VLAN IDs) |
| VLAN ID tag/untag options, per port basis |
| IEEE 802.1p/Q tag insertion or removal on a per-port basis (egress) |
| Programmable rate limiting at the ingress and egress port |
| Broadcast storm protection |
| IEEE 802.1d spanning tree protocol support |
| MAC filtering function to filter unicast packets |
| Unknown MAC address forwarding function |
| Direct forwarding mode enabling the processor to identify the ingress port and to specify the egress port |
| IGMP v1/v2 snooping support for multicast packet filtering |
| IPV6 Multicast Listener Discovery (MLD) snooping support |
| Management information base (MIB) counters for fully compliant statistics gathering: 32 MIB counters per port |
| Loop back modes for remote failure diagnostics |
| There are three kinds of register groups: |
| The PCI configuration registers are used to initialize and configure the PCI interface |
| The PCI control/status registers are used to communicate between the host and KSZ8842-PMQL/PMBL |
| Switch registers are used to support transceiver control and status. They are configurable on-the-fly (port-priority, 802.1p/d/Q, etc.) |
| Per port, 802.1p and DiffServ based |
| Re-mapping of 802.1p priority field on a per port basis |
| Full-chip hardware power-down (register configuration not saved) provides for low power dissipation |
| Per port-based software power-save on PHY (idle link detection, register configuration preserved) |
| Single power supply: 3.3V |
| Commercial Temperature Range: 0°C to +70°C |
| Industrial Temperature Range: -40°C to +85°C |
| Available in 128-pin PQFP and 100-ball LFBGA |
| Ethernet Bandwidth | 10/100Mbps |
|---|---|
| TX RX RAM Buffer | 4KB |
| Interrupt Pin | Yes |
| Op Voltage | 3.3 |
| # Ethernet Ports | 3 |
| Interface | Host Bus/PCI |
| IOPins | 0 |
| IEEE1588 | No |
| Temp Range Min | -40 |
| Temp Range Max | 85 |
| Turbo MII | No |
| Dual MII Support | No |
| Automotive | Yes |
| # of Ether Ports | 2 |
| Managed | Yes |
| Copper Support | 10/100 (2) |
| Fiber Support | No |
| MII | No |
| RMII | No |
| SMII | No |
| SNI | No |
| GMII | No |
| RGMII | No |
| SGMII | No |
| 8/16-bit | Yes |
| 32-bit | Yes |
| PCI | Yes |
| Supply Voltage (V) | 3.3 |
| Internal LDO | Yes |
| Vdd I/O (V) | 3.3/5.0 |
| LinkMD Cable Diag | Yes |
| Repeater Mode | Yes |
| On-Chip Termination | No |
| Pin-Pin With | n/a |
| ESD Rating (KV) | n/a |
| Smart Power Adjust | n/a |
| WOL | No |
| Largest Pkt-Size Bytes | 1916 |
| IPV6 | Yes |
| # of VLAN | 16 |
| Flow Ctrl | Yes |
| Rate Limiting | Yes |
| Rapid Spanning Tree | No |
| Static MAC Addr | Yes |
| Pins | Packaging | 128 | LQFP |
| Temp Range | -40C to +85C |
| Packing Media | Tray (90) |
Data Sheets |
|---|
| KSZ8842-16M/-32M - 2-Port Ethernet Switch with Non-PCI Interface |
| KSZ8842-PMQL/PMBL - 2-Port Ethernet Switch with PCI Interface |
Supporting Collateral |
|---|
| KSZ8842MQL_V1.4_HP.zip |
| KSZ8842PMQL_V1.5_DP.zip |
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.741 |
| Shipping Weight (kg) | 8.888889 |
| Lead Count | 128 |
| Package Type | LQFP |
| Package Width or Size | 14x14x1.4mm |
| Soldering Composition | Matte Tin |
| 3.5 V 2-Port Ethernet Switch Plus 8-16-Bit Generic Bus Interface - LQFP-128 | Future Electronics |
| Ethernet Switch, 100Mbps, Lqfp-128 | Newark Electronics |
| IC: ethernet switch | TME |
| 2-Port 10/100 Switch/Repeater w/ Generic 8/16-bit Bus I/F | Microchip Technology |
| ETHERNET SWITCH, 100MBPS, LQFP-128 | element14 |
Where can I find additional details, specifications and documents for a KSZ8842-16MVLI?
Additional datasheets, footprints and schematics for KSZ8842-16MVLI are listed on our Part Details page. You can also find images and similar parts to KSZ8842-16MVLI on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for KSZ8842-16MVLI on our Product Comparison page. Access via the 'View Pricing & Stock' button to view KSZ8842-16MVLI price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does KSZ8842-16MVLI fall under?
The KSZ8842-16MVLI is listed under Semiconductors - ICs > Network Controllers > Ethernet Controllers.
Can I view similar or alternative parts?
You can view similar parts to KSZ8842-16MVLI when available in the Ethernet Controllers range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the KSZ8842-16MVLI you can contact the distributor directly for product support, shipping queries etc.
Is the KSZ8842-16MVLI RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for KSZ8842-16MVLI have stock available?
Authorised distributors including Future Electronics, Newark Electronics, Avnet America, TME and Microchip Technology have stock available or on a lead time for KSZ8842-16MVLI.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for KSZ8842-16MVLI often in real-time on the comparison pages.
What if I can't find stock of KSZ8842-16MVLI?
You can fill out our help required form which you can use to request a quote for KSZ8842-16MVLI from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.