| Status: | Active |
|---|---|
| Series: | KSZ8895 |
| RoHS: | Compliant |
The KSZ8895MQX/RQX/FQX/ML is a highly-integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost. The KSZ8895 is Automotive qualified (AEC-Q100).
The KSZ8895 family was designed to be used in for cost sensitive 10/100Mbps five-port switch systems with low power requirements. Combining on-chip termination and internal LDO regulator help minimize system cost. The KSZ8895 family supports high-performance memory bandwidth and shared memory-based switch fabric with non-blocking configuration.
The KSZ8895 family also includes an extensive feature set, including: power management, programmable rate limit and priority ratio, tag/port-based VLAN, packets filtering, four queue QoS prioritization, management interfaces, and MIB counters.
The KSZ8895 family provides multiple CPU data interfaces to effectively address both current and emerging fast Ethernet applications when port 5 is configured to separate MAC5 with SW5-MII/RMII and PHY5 with P5-MII/RMII interfaces.
The KSZ8895 family offers three configurations, providing the flexibility to meet different requirements:
All registers of MACs and PHYs units can be managed by the SPI or the SMI interface. MIIM registers can be accessed through the MDC/MDIO interface.
EEPROM can set all control registers for the unmanaged mode. KSZ8895MQX/RQX/FQX are 128-pin PQFP package. KSZ8895ML is 128-pin LQFP package.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
**Please note: KSZ8895 part numbers ending/containing "A" are not recommended for new designs**
i.e. For new designs, instead of using KSZ8895MQXIA, please use KSZ8895MQXI.
Prices starting from US$10.63
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$10.63
|
29,641
in stock
|
Buy Now |
|
Newark Electronics
from US$13.75
|
76
in stock
|
Buy Now |
|
element14
from US$17.35
|
61
in stock
|
Buy Now |
|
Farnell
from US$13.00
|
61
in stock
|
Buy Now |
|
Future Electronics
from US$12.89
|
0
in stock
|
Buy Now |
|
Avnet America
from US$12.89
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
| Advanced Switch Features |
|---|
| IEEE 802.1q VLAN support for up to 128 active VLAN groups (full-range 4096 of VLAN IDs) |
| Static MAC table supports up to 32 entries |
| VLAN ID tag/untag options, per port basis |
| Comprehensive Configuration Register Access |
|---|
| Serial management interface (MDC/MDIO) to all PHYs registers and SMI interface (MDC/MDIO) to all registers |
| High-speed SPI (up to 25MHz) and I2C master Interface to all internal registers |
| I/0 pins strapping and EEPROM to program selective registers in unmanaged switch mode |
| QoS/CoS Packet Prioritization Support |
|---|
| Per port, 802.1p and DiffServ-based |
| 1/2/4-queue QoS prioritization selection |
| Programmable weighted fair queuing for ratio control |
| Integrated 5-Port 10/100 Ethernet Switch |
|---|
| New generation switch with five MACs and five PHYs that are fully compliant with the IEEE 802.3u standard |
| PHYs designed with patented enhanced mixed-signal technology |
| Non-blocking switch fabric assures fast packet delivery by utilizing a 1K MAC address lookup table and a store-and-forward architecture |
| Switch Monitoring Features |
|---|
| Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII |
| MIB counters for fully-compliant statistics gathering 34 MIB counters per port |
| Loop-back support for MAC, PHY, and remote diagnostic of failure |
| Low-Power Dissipation |
|---|
| Full-chip software power-down and per port software power down |
| Energy-detect mode support <100mW full-chip power consumption when all ports have no activity |
| Ethernet Bandwidth | 10/100Mbps |
|---|---|
| TX RX RAM Buffer | n/a |
| Interrupt Pin | Yes |
| Op Voltage | 3.3 |
| # Ethernet Ports | 5 |
| Interface | MII / RMII |
| IOPins | 0 |
| IEEE1588 | No |
| Temp Range Min | -40 |
| Temp Range Max | 85 |
| Turbo MII | No |
| Dual MII Support | No |
| Automotive | Yes |
| # of Ether Ports | 5 |
| Managed | Yes |
| Copper Support | 10/100 (4) |
| Fiber Support | 100FX (2) |
| MII | Yes |
| RMII | Yes |
| SMII | No |
| SNI | No |
| GMII | No |
| RGMII | No |
| SGMII | No |
| 8/16-bit | No |
| 32-bit | No |
| PCI | No |
| Supply Voltage (V) | 3.3 |
| Internal LDO | Yes cntlr |
| Vdd I/O (V) | 1.8/2.5/3.3 |
| LinkMD Cable Diag | Yes |
| Repeater Mode | No |
| On-Chip Termination | Yes |
| Pin-Pin With | n/a |
| ESD Rating (KV) | 1.5KV |
| Smart Power Adjust | Yes |
| WOL | No |
| Largest Pkt-Size Bytes | 2000 |
| IPV6 | Yes |
| # of VLAN | 128 |
| Flow Ctrl | Yes |
| Rate Limiting | Yes |
| Rapid Spanning Tree | Yes |
| Static MAC Addr | Yes |
| Pins | Packaging | 128 | PQFP |
| Temp Range | -40C to +85C |
| Packing Media | Tray (66) |
Data Sheets |
|---|
| KSZ8895MQX/RQX/FQX/ML - Integrated 5-Port 10/100 Managed Switch |
| KSZ8895MLUB Integrated 5-Port 10/100 Managed Switch |
Board Design Files |
|---|
| KSZ8895MQX Ibis |
| KSZ8895RQX Ibis |
| KSZ8895FQX Ibis |
Miscellaneous |
|---|
| RMII Connections for KSZ8895RQ |
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 1.7615 |
| Shipping Weight (kg) | 4.015152 |
| Lead Count | 128 |
| Package Type | PQFP |
| Package Width or Size | 14x20x2.72mm |
| Soldering Composition | Matte Tin |
| 5-Port 10/100 Managed Switch w/ MII, RMII | Microchip Technology |
| Ethernet Switch, 100Mbps, Pqfp-128 | Newark Electronics |
| ETHERNET SWITCH, 100MBPS, PQFP-128 | element14 |
| 5-PORT 10/100 MANAGED SWITCH W/ MII, RMII | Future Electronics |
| Ethernet Switch 5 Port 10Mbps/100Mbps 128-Pin PQFP | Avnet America |
Where can I find additional details, specifications and documents for a KSZ8895FQXIA?
Additional datasheets, footprints and schematics for KSZ8895FQXIA are listed on our Part Details page. You can also find images and similar parts to KSZ8895FQXIA on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for KSZ8895FQXIA on our Product Comparison page. Access via the 'View Pricing & Stock' button to view KSZ8895FQXIA price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does KSZ8895FQXIA fall under?
The KSZ8895FQXIA is listed under Semiconductors - ICs > Network Controllers > Ethernet Controllers.
Can I view similar or alternative parts?
You can view similar parts to KSZ8895FQXIA when available in the Ethernet Controllers range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the KSZ8895FQXIA you can contact the distributor directly for product support, shipping queries etc.
Is the KSZ8895FQXIA RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for KSZ8895FQXIA have stock available?
Authorised distributors including Microchip Technology, Newark Electronics, element14, Farnell and Future Electronics have stock available or on a lead time for KSZ8895FQXIA.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for KSZ8895FQXIA often in real-time on the comparison pages.
What if I can't find stock of KSZ8895FQXIA?
You can fill out our help required form which you can use to request a quote for KSZ8895FQXIA from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.