KSZ9031MNXCA by Microchip Technology
Gigabit Ethernet Transceiver with Power Saving Features
| Status: | Active |
|---|---|
| Series: | KSZ9031 |
| RoHS: | Compliant |
The KSZ9031MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps. The KSZ9031RNX provides the reduced gigabit media independent interface (RGMII).
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core. The KSZ9031 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9031 I/Os and the board. The LinkMD® TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.
The standard KSZ9031RNX is available in the 48-pin, lead-free QFN package, and the AEC-Q100 automotive qualified parts, KSZ9031RNXUB-VAO and KSZ9031RNXVB-VAO, are available in the 48-pin lead-free WQFN package. The KSZ9031MNX is available in a 64-pin, lead-free QFN package.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Features
| Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver |
| KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os |
| KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths |
| GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os |
| Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full) |
| On-chip termination resistors for the differential pairs |
| On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core |
| Jumbo frame support up to 16KB |
| 125MHz Reference Clock Output |
| Energy-detect power-down mode for reduced power consumption when the cable is not attached |
| Wake-on-LAN (WOL) support with robust custom-packet detection |
| AEC-Q100 qualified for automotive applications (KSZ9031RNXUB-VAO, KSZ9031RNXVB-VAO) |
| Programmable LED outputs for link, activity, and speed |
| Baseline wander correction |
| LinkMD® TDR-based cable diagnostic to identify faulty copper cabling |
| Parametric NAND tree support to detect faults between chip I/Os and board |
| Loopback modes for diagnostics |
| Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation |
| Automatic detection and correction of pair swaps, pair skew, and pair polarity |
| MDC/MDIO management interface for PHY register configuration |
| Interrupt pin option |
| Power-down and power-saving modes |
| Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator) |
| VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V |
| Transceiver (AVDDH): 3.3V or 2.5V (commercial temp) |
| Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| KSZ9031MNX Gigabit Ethernet Transceiver with GMII/MII Support Data Sheet |
| KSZ9031RNX Gigabit Ethernet Transceiver with RGMII Support Datasheet |
Errata |
|---|
| KSZ9031MNX - Silicon Errata & Data Sheet Clarification |
| KSZ9031RNX - Silicon Errata & Data Sheet Clarification |
Board Design Files |
|---|
| KSZ9031 IBIS |
Supporting Collateral |
|---|
| KSZ9031MNX Hardware Design Checklist |
| KSZ9031RNX Hardware Design Checklist |
| Migration Guide - KSZ9021RN to KSZ9031RNX rev 1.1 |
| KSZ9031MNX_v1.3_DP.zip |
| KSZ9031RNX_v1.3_DP.zip |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.1775 |
| Shipping Weight (kg) | 1.026923 |
| Lead Count | 64 |
| Package Type | VQFN |
| Package Width or Size | 8x8x0.9mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| ETHERNET TRANSCEIVER, 1000MBPS, QFN-64 | Farnell |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a KSZ9031MNXCA?
Additional datasheets, footprints and schematics for KSZ9031MNXCA are listed on our Part Details page. You can also find images and similar parts to KSZ9031MNXCA on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for KSZ9031MNXCA on our Product Comparison page. Access via the 'View Pricing & Stock' button to view KSZ9031MNXCA price breaks, MOQs, lead times, inventory and SKUs from distributors.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the KSZ9031MNXCA you can contact the distributor directly for product support, shipping queries etc.
Is the KSZ9031MNXCA RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for KSZ9031MNXCA have stock available?
Authorised distributors including Farnell, EBV Elektronik and Avnet Silica have stock available or on a lead time for KSZ9031MNXCA.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for KSZ9031MNXCA often in real-time on the comparison pages.
What if I can't find stock of KSZ9031MNXCA?
You can fill out our help required form which you can use to request a quote for KSZ9031MNXCA from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.