LAN91C110-PU by Microchip Technology
10/100 Base-T/TX Ethernet Controller with 16/32 Bit Interface
| Status: | Not Recommended |
|---|---|
| Series: | LAN91C110 |
| RoHS: | Compliant |
The LAN91C110 is designed to facilitate the implementation of second generation Fast Ethernet PC Card adapters and other non-PCI connectivity products. The LAN91C110 is a digital device that implements the Media Access Control (MAC) portion of the CSMA/CD protocol at 10 and 100 Mbps, and couples it with a lean and fast data and control path system architecture to ensure that the CPU to packet RAM data movement does not cause a bottleneck at 100 Mbps.
The LAN91C110 implements a generic 16-bit host interface which is adaptable to a wide range of system buses and CPUs. This makes the LAN91C110 ideal for 10/100 Fast Ethernet implementations in systems based on system buses other than PCI.
Total memory size is 128 Kbytes, equivalent to a total chip storage (transmit plus receive) of 64 outstanding packets. The LAN91C110 is software compatible with the LAN9000 family of products in the default mode and can use existing LAN9000 drivers (ODI, IPX, and NDIS) with minor modifications in 16 and 32 bit Intel X86 based environments.
Memory management is handled using a unique MMU (Memory Management Unit) architecture and a 32 bit wide data path. This I/O mapped architecture can sustain back-to-back frame transmission and reception for superior data throughput and optimal performance. It also dynamically allocates buffer memory in an efficient buffer utilization scheme, reducing software tasks and relieving the host CPU from performing these housekeeping functions. The total memory size is 128 Kbytes (external), equivalent to a total chip storage (transmit and receive) of 64 outstanding packets.
FEAST provides a flexible slave interface for easy connectivity with industry-standard buses. The host interface is "ISA-like" and is easily adapted to a wide range of system and CPU buses.
An IEEE-802.3 compliant Media Independent Interface (MII) is provided on the network side of the LAN91C110. The MII interface allows the use of a wide range of MII compliant physical layer (PHY) devices to be used with the LAN91C110. The LAN91C110 also provides an interface to the two-line MII serial management protocol.
*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Features
| Dual Speed CSMA/CD Engine (10 Mbps and 100 Mbps) |
| Compliant with IEEE 802.3 100BASE-T Specification |
| Supports 100BASE-TX and 100BASE-T4 |
| 16 Bit Wide Data Path (into Packet Buffer Memory) |
| Generic 16 Bit System Level Interface Easily Adaptable to ISA, PCMCIA (16 Bit CardBus), and Various CPU System Interfaces |
| Support for 16 and 8 Bit CPU Accesses |
| Asynchronous Bus Interface |
| 128 Kbyte External Memory |
| Built-In Transparent Arbitration for Slave Sequential Access Architecture |
| Flat MMU Architecture with Symmetric Transmit and Receive Structures and Queues |
| IEEE 802.3 MII (Media Independent Interface) Compliant MAC-PHY Interface Running at Nibble Rate |
| MII Management Serial Interface |
| IEEE-802.3u Full Duplex Capability |
| 144 Pin TQFP RoHS Compliant Package (1.0 Millimeter Height) |
Specifications
| Comments | 10Base-T/100Base-TX Ethernet Controller with 16/32 bit interface |
|---|---|
| Ethernet Bandwidth | 10/100Mbps |
| TX/RX RAM Buffer(Bytes) | External 128K |
| Interrupt Pin | 1 |
| LEDs | 0 |
| Op. Voltage (V) | 0 |
| # Ethernet Ports | 1 |
| Temp Range Min | 0 |
| Temp Rang Max | 70 |
| Mixed Endian | No |
| Checksum Offload | No |
| # of Ether Ports | 0 |
| Fiber Support | No |
| Interface | 16 bit PCMCIA and Host Bus |
| Buffer size Rx (KB) | 0 |
| Buffer size Tx (KB) | 0 |
| Supply voltage (V) | 0 |
| Vdd I/O (V) | 5 |
| LinkMD Cable Diag | No |
| ESD Rating (KV) | 0 |
| WOL | No |
| Largets Pkt-Size Bytes | 0 |
| # of VLAN | 0 |
Last 6 months Inventory & Pricing History
Resources
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 1.0143 |
| Shipping Weight (kg) | 3.95 |
| Lead Count | 144 |
| Package Type | TQFP |
| Package Width or Size | 20x20x1.0mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| ETHERNET TRANSCEIVER, 100MBPS, TQFP-144 | Farnell |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a LAN91C110-PU?
Additional datasheets, footprints and schematics for LAN91C110-PU are listed on our Part Details page. You can also find images and similar parts to LAN91C110-PU on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for LAN91C110-PU on our Product Comparison page. Access via the 'View Pricing & Stock' button to view LAN91C110-PU price breaks, MOQs, lead times, inventory and SKUs from distributors.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the LAN91C110-PU you can contact the distributor directly for product support, shipping queries etc.
Is the LAN91C110-PU RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for LAN91C110-PU have stock available?
Authorised distributors including Rochester Electronics and Farnell have stock available or on a lead time for LAN91C110-PU.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for LAN91C110-PU often in real-time on the comparison pages.
What if I can't find stock of LAN91C110-PU?
You can fill out our help required form which you can use to request a quote for LAN91C110-PU from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.