LT1079CN#PBF Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C) by Analog Devices

Status: Production
Series: LT1079
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The LT1078 is a micropower dual op amp in 8-pin packages including the small outline surface mount package. The LT1079 is a micropower quad op amp offered in the standard 14-pin packages. Both devices are optimized for single supply operation at 5V. ±15V specifications are also provided.Micropower performance of competing devices is achieved at the expense of seriously degrading precision, noise, speed and output drive specifications. The design effort of the LT1078/LT1079 was concentrated on reducing supply current without sacrificing other parameters. The offset voltage achieved is the lowest on any dual or quad nonchopper stabilized op amp—micropower or otherwise. Offset current, voltage and current noise, slew rate and gain bandwidth product are all two to ten times better than on previous micropower op amps.The 1/f corner of the voltage noise spectrum is at 0.7Hz, at least three times lower than on any monolithic op amp. This results in low frequency (0.1Hz to 10Hz) noise performance which can only be found on devices with an order of magnitude higher supply current.Both the LT1078 and LT1079 can be operated from a single supply (as low as one lithium cell or two Ni-Cad batteries). The input range goes below ground. The all-NPN output stage swings to within a few millivolts of ground while sinking current—no power consuming pull down resistors are needed.

Where to Buy

Prices starting from US$4.19

Distributor Stock
Logo for Newark
Newark Electronics
from US$5.67
139
in stock
Buy Now
Logo for element14 Singapore
element14
from US$6.56
139
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$5.83
139
in stock
Buy Now
Logo for Analog Devices
Analog Devices
from US$4.19
65
in stock
Buy Now
Logo for TME
TME
from US$6.50
0
in stock
Buy Now
Logo for Buerklin
Buerklin
from US$10.52
0
in stock
Buy Now
Logo for Richardson RFPD
Richardson RFPD
from US$5.55
0
in stock
Buy Now
Buy Now

Features

Available in 8-Pin SO Package
50µA Max Supply Current per Amplifier
70µV Max Offset Voltage
180µA Max Offset Voltage in 8-Pin SO
250pA Max Offset Current
0.6µVP-P, 0.1Hz to 10Hz Voltage Noise
3pAP-P, 0.1Hz to 10Hz Current Noise
0.4µV/°C Offset Voltage Drift
200kHz Gain Bandwidth Product
0.07V/µs Slew Rate
Single Supply Operation
Input Voltage Range Includes Ground
Output Swings to Ground while Sinking Current
No Pull-Down
Output Sources and Sinks 5mA Load Current

Last 6 months Inventory & Pricing History


Alternative Descriptions

Op-Amp, 200Khz, 0 To 70Deg C, Dip-14 | Newark Electronics
OP-AMP, 200KHZ, 0 TO 70DEG C, DIP-14 | element14
uP, 2x & 4x, 1x S, Prec Op Amp | Analog Devices
IC: operational amplifier | TME
Op Amp Quad Precision Amplifier ±22V/44V 14-Pin PDIP N Tube | Richardson RFPD


LT1079CN#PBF Amplifiers & Comparators by Linear Technology

OP AMP QUAD PRECISION 1079 DIP14

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

No. of Amplifiers 4 Amplifier, 4Amplifiers
Bandwidth 200kHz
Slew Rate 0.07V/µs
Supply Voltage Range 2.3V to 12V
Amplifier Case Style DIP
No. of Pins 14Pins
Operating Temperature Min 0°C
Operating Temperature Max 70°C
Product Range -
Automotive Qualification Standard -
MSL -
SVHC No SVHC (15-Jan-2018)
Amplifer Supply Voltage 2.3V to 12V
Base Number 1079
Gain Bandwidth 200kHz
IC Generic Number 1079
IC Temperature Range Commercial
Input Offset Voltage Max 0.12mV
Logic Function Number 1079
Op Amp Type Precision
Operating Temperature Range 0°C to +70°C
Operational Amplifier Features Low Power
Supply Voltage + Nom 5V
Supply Voltage Max 22V

Last 6 months Inventory & Pricing History


Alternative Descriptions

Quad Precision Operational Amplifier, PDIP-14, LT1079CN#PBF | Buerklin

Frequently Asked Questions

Where can I find additional details, specifications and documents for a LT1079CN#PBF?

Additional datasheets, footprints and schematics for LT1079CN#PBF are listed on our Part Details page. You can also find images and similar parts to LT1079CN#PBF on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for LT1079CN#PBF on our Product Comparison page. Access via the 'View Pricing & Stock' button to view LT1079CN#PBF price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does LT1079CN#PBF fall under?

The LT1079CN#PBF is listed under Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C).

Can I view similar or alternative parts?

You can view similar parts to LT1079CN#PBF when available in the Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C) range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the LT1079CN#PBF you can contact the distributor directly for product support, shipping queries etc.

Is the LT1079CN#PBF RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for LT1079CN#PBF have stock available?

Authorised distributors including Newark Electronics, element14, Farnell, Analog Devices and TME have stock available or on a lead time for LT1079CN#PBF.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for LT1079CN#PBF often in real-time on the comparison pages.

What if I can't find stock of LT1079CN#PBF?

You can fill out our help required form which you can use to request a quote for LT1079CN#PBF from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.