LT3972IDD#PBF Micropower Buck Regulators by Analog Devices

Status: Production
Series: LT3972
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The LT3972 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 33V (62V Maximum). A high efficiency 95mΩ switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3972 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage. The LT3972 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with exposed pads for low thermal resistance.

Where to Buy

Prices starting from US$9.26

Distributor Stock
Logo for Newark
Newark Electronics
from US$10.09
0
in stock
Buy Now
Logo for element14 Singapore
element14
from US$10.70
0
in stock
Buy Now
Logo for Richardson RFPD
Richardson RFPD
from US$9.26
0
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$10.21
0
in stock
Buy Now
Buy Now

Features

Wide Input Range:
Operation from 3.6V to 33V
Over-Voltage Lockout Protects Circuits Through 62V Transients
3.5A Maximum Output Current
Low Ripple (<15mVP-P) Burst Mode® Operation: IQ= 75μA at 12VIN to 3.3VOUT
Adjustable Switching Frequency: 200kHz to 2.4MHz
Low Shutdown Current: IQ < 1μA
Integrated Boost Diode
Synchronizable Between 250kHz to 2MHz
Power Good Flag
Saturating Switch Design: 95mΩ On-Resistance
Output Voltage: 0.79V to 30V
Thermal Protection
Soft-Start Capability
Small 10-Pin Thermally Enhanced MSOP and (3mm × 3mm) DFN Packages

Last 6 months Inventory & Pricing History


Alternative Descriptions

Dc/Dc Conv, Buck, 2.45Mhz, 125Deg C | Newark Electronics
DC/DC CONV, BUCK, 2.45MHZ, 125DEG C | element14
Conv DC-DC 3.6V to 33V Synchronous Step Down Single-Out 0.79V to 30V 3.5A 10-Pin DFN EP Tube | Richardson RFPD


LT3972IDD#PBF Semiconductors - ICs by Linear Technology

VOLTAGE REG BUCK 3.5A 2.4MHZ DFN-10

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Topology Buck (Step Down)
Input Voltage Min 3.6V
Input Voltage Max 33V
No. of Outputs 1Outputs
DC / DC Converter IC Case DFN
No. of Pins 10Pins
Output Current 3.5A
Output Voltage Min 790mV
Output Voltage Max 30V
Switching Frequency 2.7MHz
Operating Temperature Max 125°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant Yes
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)
Operating Temperature Min -40°C
Operating Temperature Range -40°C to +125°C
Primary Input Voltage 33V

Frequently Asked Questions

Where can I find additional details, specifications and documents for a LT3972IDD#PBF?

Additional datasheets, footprints and schematics for LT3972IDD#PBF are listed on our Part Details page. You can also find images and similar parts to LT3972IDD#PBF on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for LT3972IDD#PBF on our Product Comparison page. Access via the 'View Pricing & Stock' button to view LT3972IDD#PBF price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does LT3972IDD#PBF fall under?

The LT3972IDD#PBF is listed under Micropower Buck Regulators.

Can I view similar or alternative parts?

You can view similar parts to LT3972IDD#PBF when available in the Micropower Buck Regulators range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the LT3972IDD#PBF you can contact the distributor directly for product support, shipping queries etc.

Is the LT3972IDD#PBF RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for LT3972IDD#PBF have stock available?

Authorised distributors including Newark Electronics, element14, Richardson RFPD and Farnell have stock available or on a lead time for LT3972IDD#PBF.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for LT3972IDD#PBF often in real-time on the comparison pages.

What if I can't find stock of LT3972IDD#PBF?

You can fill out our help required form which you can use to request a quote for LT3972IDD#PBF from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.