LTC3602EUF#PBF Internal Power Switch Buck Regulators by Analog Devices

Status: Production
Series: LTC3602
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The LTC3602 is a high efficiency, monolithic synchronous, step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates from an input voltage range of 4.5V to 10V and provides an adjustable regulated output voltage from 0.6V to 9.5V while delivering up to 2.5A of output current. The internal synchronous power switch with 65mΩ on-resistance increases efficiency and eliminates the need for an external Schottky diode. The switching frequency can either be set by an external resistor or synchronized to an external clock. OPTI-LOOP® compensation allows the transient response to be optimized over a wide range of loads and output capacitors. The LTC3602 can be configured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference, while Burst Mode operation provides the high efficiency at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.

Where to Buy

Prices starting from US$5.50

Distributor Stock
Logo for Analog Devices
Analog Devices
from US$5.50
746
in stock
Buy Now
Logo for Richardson RFPD
Richardson RFPD
from US$7.29
0
in stock
Buy Now
Buy Now

Features

Wide Input Voltage Range: 4.5V to 10V
2.5A Output Current
Low RDS(ON) Internal Switches: 65mΩ and 90mΩ
Programmable Frequency: 300kHz to 3MHz
Low Quiescent Current: 75μA
0.6V ±1% Reference Allows Low Output Voltage
99% Maximum Duty Cycle
Adjustable Burst Mode® Clamp
Synchronizable to External Clock
Power Good Output Voltage Monitor
Overtemperature Protection
Available in 16-Lead Exposed TSSOP and 4mm × 4mm QFN Packages

Last 6 months Inventory & Pricing History


Alternative Descriptions

2.5A, 10V, Mono Sync Buck Reg | Analog Devices
Conv DC-DC 4.5V to 10V Synchronous Step Down Single-Out 0.6V to 9.5V 2.5A 20-Pin QFN EP Tube | Richardson RFPD


LTC3602EUF#PBF Semiconductors - ICs by Linear Technology

STEP D REG 2.5A 10V SYNC 20QFN

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Topology Synchronous Buck (Step Down)
Input Voltage Min 4.5V
Input Voltage Max 10V
No. of Outputs 1Outputs
DC / DC Converter IC Case QFN
No. of Pins 20Pins
Output Current 2.5A
Output Voltage Min 600mV
Output Voltage Max 9.5V
Switching Frequency 3MHz
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant Yes
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)
Adjustable Output Voltage Min 600mV
Base Number 3602
Frequency 1MHz
Operating Temperature Min -40°C
Operating Temperature Range -40°C to +85°C
Output Voltage 9.5V
Primary Input Voltage 10V
Supply Voltage Min 4.5V
Termination Type Surface Mount Device
Voltage Regulator Type Step Down (Buck)

Frequently Asked Questions

Where can I find additional details, specifications and documents for a LTC3602EUF#PBF?

Additional datasheets, footprints and schematics for LTC3602EUF#PBF are listed on our Part Details page. You can also find images and similar parts to LTC3602EUF#PBF on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for LTC3602EUF#PBF on our Product Comparison page. Access via the 'View Pricing & Stock' button to view LTC3602EUF#PBF price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does LTC3602EUF#PBF fall under?

The LTC3602EUF#PBF is listed under Internal Power Switch Buck Regulators.

Can I view similar or alternative parts?

You can view similar parts to LTC3602EUF#PBF when available in the Internal Power Switch Buck Regulators range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the LTC3602EUF#PBF you can contact the distributor directly for product support, shipping queries etc.

Is the LTC3602EUF#PBF RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by Analog Devices.

Which authorised distributors for LTC3602EUF#PBF have stock available?

Authorised distributors including Analog Devices and Richardson RFPD have stock available or on a lead time for LTC3602EUF#PBF.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for LTC3602EUF#PBF often in real-time on the comparison pages.

What if I can't find stock of LTC3602EUF#PBF?

You can fill out our help required form which you can use to request a quote for LTC3602EUF#PBF from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.