MAX14430EAEE+ by Analog Devices

Four-Channel, Fast, Low-Power, 3kVRMS and 3.75kVRMS Digital Isolators

Status: Active
Series: MAX14430
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX14430–MAX14432 are fast, low power, 4-channel, digital galvanic isolators using Maxim’s proprietary process technology. These devices transfer digital signals between circuits with different power domains while using as little as 0.58mW per channel at 1Mbps with a 1.8V supply. The MAX14430–MAX14432 have an isolation rating of 3kVRMS (QSOP package) or 3.75kVRMS (narrow SOIC package) for 60 seconds. For applications requiring 5kVRMS of isolation, see the MAX14434-MAX14436. The MAX14430–MAX14432 family offers all three possible unidirectional channel configurations to accommodate any 4-channel design, including SPI, RS-232, RS-485, and digital I/O applications. Output enable for the A side of the MAX14431R/S/U/V is active-low, making them ideal for isolating a port on a shared SPI bus since the active-low CS signal can directly enable the MISO signal on the isolator. All other devices in the family have the traditional active-high enable. Devices are available with a maximum data rate of either 25Mbps or 200Mbps and with outputs that are either default-high or default-low. The default is the state the output assumes when the input is either not powered or is open-circuit. See the Ordering Information and Product Selector Guide for suffixes associated with each option. Independent 1.71V to 5.5V supplies on each side of the isolator also make the devices suitable for use as level translators. The MAX14430–MAX14432 are available either in a 16-pin narrow-body SOIC package with 4mm of creepage and clearance, or in a smaller 16-pin QSOP package with 4mm of creepage and clearance. The SOIC package material has a minimum comparative tracking index (CTI) of 600, which gives it a group I rating in creepage table. The QSOP package material has a minimum CTI of 400, which gives it a group II rating in creepage table. All devices are rated for operation at ambient temperatures of -40°C to +125°C.

Where to Buy

Prices starting from US$5.76

Distributor Stock
Logo for Newark
Newark Electronics
from US$5.76
53
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$7.29
53
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$6.93
53
in stock
 Buy Now
Buy Now

Features

Robust Galvanic Isolation for Fast Digital Signals Up to 200Mbps Data Rate Continuously Withstands 445VRMS (VIOWM) Withstands 3.75kVRMS for 60s (VISO) Narrow SOIC Package Withstands 3kVRMS for 60s (VISO) QSOP Package Withstands ±10kV Surge between GNDA and GNDB with 1.2/50µs Waveform Narrow SOIC Package Withstands ±7.5kV Surge between GNDA and GNDB with 1.2/50µs Waveform QSOP Package High CMTI (50kV/µs, Typical)
Up to 200Mbps Data Rate
Continuously Withstands 445VRMS (VIOWM)
Withstands 3.75kVRMS for 60s (VISO) Narrow SOIC Package
Withstands 3kVRMS for 60s (VISO) QSOP Package
Withstands ±10kV Surge between GNDA and GNDB with 1.2/50µs Waveform Narrow SOIC Package
Withstands ±7.5kV Surge between GNDA and GNDB with 1.2/50µs Waveform QSOP Package
High CMTI (50kV/µs, Typical)
Low Power Consumption 1.1mW per Channel at 1Mbps with VDD = 3.3V 3.5mW per Channel at 100Mbps with VDD = 1.8V
1.1mW per Channel at 1Mbps with VDD = 3.3V
3.5mW per Channel at 100Mbps with VDD = 1.8V
Options to Support a Broad Range of Applications 2 Data Rates (25Mbps, 200Mbps) 3 Channel Direction Configurations 2 Output Default States (High/Low) Two Packages (Narrow SOIC and QSOP)
2 Data Rates (25Mbps, 200Mbps)
3 Channel Direction Configurations
2 Output Default States (High/Low)
Two Packages (Narrow SOIC and QSOP)

Specifications

# Channels 4
Insulation Rating 3750VRMS
# Uni-directional Inputs (Side A) 4
Uni-directional Data Rate (Mbps) (max) 25
Oper. Temp. (°C) -40 to +125
Package/Pins See Data Sheet

Last 6 months Inventory & Pricing History

MAX14430EAEE+ Drivers & Interfaces by Analog Devices

DIGITAL ISOLATOR, 4CH, -40 TO 125DEG C

Semiconductors - ICs
> Drivers & Interfaces
> Isolators
Status: Unknown
Series: -
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

RoHS Compliant YES

Last 6 months Inventory & Pricing History

Alternative Descriptions

Digital Isolator, 4Ch, 125Deg C, Qsop-16 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX14430EAEE+ ?

Additional datasheets, footprints and schematics for MAX14430EAEE+ are listed on our Part Details page. You can also find images and similar parts to MAX14430EAEE+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX14430EAEE+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX14430EAEE+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX14430EAEE+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX14430EAEE+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX14430EAEE+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX14430EAEE+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX14430EAEE+ often in real-time on the comparison pages.

What if I can't find stock of MAX14430EAEE+ ?

You can fill out our help required form which you can use to request a quote for MAX14430EAEE+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.