MAX14820ETG+ by Analog Devices

IO-Link Device Transceiver


The MAX14820 transceiver is suitable for IO-Link® devices and 24V binary sensors/actuators. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are independently configurable for push-pull, high-side (PNP), or low-side (NPN) operation. The device detects the IO-Link C/Q wake-up condition and generates a wake-up signal on the active-low WU output. The C/Q and DI inputs have selectable current loads for use in actuators. An SPI™ interface allows configuration and monitoring of the devices. Extensive alarm conditions are detected and communicated through the active-low IRQ output and the SPI interface. The devices feature reverse-polarity, short-circuit, and thermal protection. All power lines are monitored for undervoltage conditions. The C/Q driver is specified for sinking/sourcing ±300mA. The DO driver is specified for sinking/sourcing ±135mA. The MAX14820 is available in a 4mm x 4mm, 24-pin TQFN package, and is specified over the extended -40°C to +85°C temperature range.

Where to Buy

Prices starting from US$5.80

Distributor Stock
Logo for Analog Devices
Analog Devices
from US$5.80
3,375
in stock
Buy Now
Logo for Newark
Newark Electronics
from US$8.48
0
in stock
Buy Now
Logo for element14 Singapore
element14
from US$8.99
0
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$8.25
0
in stock
Buy Now
Buy Now

Features

IO-Link Specification V1.0 and V1.1 Physical Layer Compliant
Supports COM1, COM2, and COM3 Data Rates
IO-Link Device Wake-Up Detection
Push-Pull, High-Side, or Low-Side Outputs
300mA Specified C/Q Output Drive
1µF C/Q and DO Load-Drive Capability
Auxiliary 24V, 135mA Digital Output
Auxiliary 24V Digital Input
Optional 6mA/7mA Current Loads at Both 24V Inputs
5V and 3.3V Linear Regulators
Reverse-Polarity Protected 24V Supply Output
EMI Emission Control Through Slew-Controlled Driver
SPI Interface for Configuration and Monitoring
2.5V to 5V Logic Interface Levels
Reverse-Polarity and Short-Circuit Protection on All 24V Inputs/Outputs
High-Temperature Warning and Thermal Shutdown
Extensive Fault Monitoring and Reporting
-40°C to +85°C Operating Temperature Range
4mm x 4mm, 24-Pin TQFN Package

Specifications

Functions IO-Link Device Transceiver
VCC (V) (min) 9
VCC (V) (max) 36
C/Q (mA) (typ) 375
DO (mA) (typ) 200
Selectable Slew Rate Yes
Logic-Level Supply Voltage (V) 2.3 to 5.5
Integrated Power 3.3V LDO5V LDO
Protection Features High Temp Warning and ShutdownReverse PolarityShort CircuitUVLO
Package/Pins TQFN/24
Oper. Temp. (°C) -40 to +85
BudgetaryPrice (See Notes) 4.71

Last 6 months Inventory & Pricing History



MAX14820ETG+ - Integrated Circuits by Analog Devices

IO-LINK DEVICE TRANSCEIVER TQFN-24

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

The MAX14820 transceiver is suitable for IO-Link® devices and 24V binary sensors/actuators. All specified IO-Link data rates are supported. In IO-Link applica- tions, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are independently config- urable for push-pull, high-side (PNP), or low-side (NPN) operation. The device detects the IO-Link C/Q wake-up condition and generates a wake-up signal on the active- low WU output. The C/Q and DI inputs have selectable current loads for use in actuators. An SPI™ interface allows configuration and monitoring of the devices. Extensive alarm conditions are detected and communicated through the IRQ output and the SPI inter- face. The devices feature reverse-polarity, short-circuit, and thermal protection. All power lines are monitored for undervoltage conditions. The C/Q driver is specified for sinking/sourcing 300mA. The DO driver is specified for sinking/sourcing 135mA. The device is available in a 4mm x 4mm, 24-pin TQFN package, and is specified over the extended -40NC to +85NC temperature range.

Specifications

IC Function Transceiver
Supply Voltage Min 9V
Supply Voltage Max 36V
IC Package Type TQFN
No. of Pins 24Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Last 6 months Inventory & Pricing History


Alternative Descriptions

IO-Link Device Transceiver | Analog Devices
Io-Link Device Transceiver36V, Tqfn-24 | Newark Electronics
IO-LINK DEVICE TRANSCEIVER, TQFN-24 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX14820ETG+ ?

Additional datasheets, footprints and schematics for MAX14820ETG+ are listed on our Part Details page. You can also find images and similar parts to MAX14820ETG+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX14820ETG+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX14820ETG+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX14820ETG+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX14820ETG+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX14820ETG+ have stock available?

Authorised distributors including Analog Devices, Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX14820ETG+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX14820ETG+ often in real-time on the comparison pages.

What if I can't find stock of MAX14820ETG+ ?

You can fill out our help required form which you can use to request a quote for MAX14820ETG+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.