MAX16129UAAGA+ by Analog Devices

Load-Dump/Reverse-Voltage Protection Circuits


The MAX16128/MAX16129 load-dump/reverse-voltage protection circuits protect power supplies from damaging input-voltage conditions, including overvoltage, reverse-voltage, and high-voltage transient pulses. Using a built-in charge pump, the devices control two external back-to-back n-channel MOSFETs that turn off and isolate downstream power supplies during damaging input conditions, such as an automotive load-dump pulse or a reverse-battery condition. Operation is guaranteed down to 3V that ensures proper operation during automotive cold-crank conditions. These devices feature a flag output (active-low FLAG) that asserts during fault conditions. For reverse-voltage protection, external back-to-back MOSFETs outperform the traditional reverse-battery diode, minimizing the voltage drop and power dissipation during normal operation. The devices use fixed overvoltage and undervoltage thresholds, minimizing the external component count. The MAX16129 provides limiter-mode fault management for overvoltage and thermal-shutdown conditions; whereas the MAX16128 provides switch-mode fault management for overvoltage and thermal shutdown conditions. In the limiter mode, the output voltage is limited and active-low FLAG is asserted low during a fault. In the switch mode, the external MOSFETs are switched off and active-low FLAG is asserted low after a fault. The switch mode is available in four options—Latch mode, 1 Autoretry mode, 3 Autoretry mode, and Always autoretry mode. The MAX16128/MAX16129 are available in an 8-pin µMAX® package and operate over the automotive temperature range (-40°C to +125°C).

Where to Buy

Prices starting from US$0.57

Distributor Stock
Logo for element14 Singapore
element14
from US$3.17
83
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$3.00
83
in stock
Buy Now
Logo for Newark
Newark Electronics
from US$0.57
20
in stock
Buy Now
Buy Now

Features

Increases Protection of Sensitive Electronic Components in Harsh Environments -36V to +90V Wide Input-Voltage Protection Range Fast Gate Shutoff During Fault Conditions with Complete Load Isolation Thermal Shutdown Protection Active-Low FLAG Output Identifies Fault Condition
-36V to +90V Wide Input-Voltage Protection Range
Fast Gate Shutoff During Fault Conditions with Complete Load Isolation
Thermal Shutdown Protection
Active-Low FLAG Output Identifies Fault Condition
Automotive Qualified Operates Down to +3V, Riding Out Cold-Crank Conditions -40°C to +125°C Operating Temperature Range
Operates Down to +3V, Riding Out Cold-Crank Conditions
-40°C to +125°C Operating Temperature Range
Integration Reduces Solution Size Internal Charge-Pump Circuit Enhances External n-Channel MOSFET Fixed Undervoltage/Overvoltage Thresholds 3mm × 3mm, 8-Pin µMAX Package
Internal Charge-Pump Circuit Enhances External n-Channel MOSFET
Fixed Undervoltage/Overvoltage Thresholds
3mm × 3mm, 8-Pin µMAX Package
Reduced Power Dissipation Compared to Discrete Solutions Minimal Operating Voltage Drop for Reverse-Voltage Protection 380µA Supply Current and 100µA Shutdown Current at 30V Input
Minimal Operating Voltage Drop for Reverse-Voltage Protection
380µA Supply Current and 100µA Shutdown Current at 30V Input

Specifications

# Channels 1
VIN (V) (min) 3
VIN (V) (max) 90
Over Voltage Trip Level (V) Adjustable
Under Voltage Lockout (V) Adjustable
VGATE (V) 9
Over Volt. Flag Open-Drain
Oper. Temp. (°C) -40 to +125
Package/Pins UMAX/8
BudgetaryPrice (See Notes) 1.51

Last 6 months Inventory & Pricing History



MAX16129UAAGA+ - Integrated Circuits by Analog Devices

LOAD DUMP/REV VOLT PROTECTION CKT UMAX8

Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Threshold Voltage -
No. of Supervisors / Monitors 1Monitors
Supply Voltage Min 3V
Supply Voltage Max 30V
Reset Type Internal
Digital IC Case µMAX
No. of Pins 8Pins
Delay Time 21µs
Operating Temperature Min -40°C
Operating Temperature Max 125°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)
IC Function Overvoltage Undervoltage and Reverse Supply Protection Controller
IC Package Type µMAX

Last 6 months Inventory & Pricing History


Alternative Descriptions

LOAD DUMP/REV VOLT PROTECTION CKT, UMAX8 | element14
Load Dump/Rev Volt Protection Ckt, Umax8 | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX16129UAAGA+ ?

Additional datasheets, footprints and schematics for MAX16129UAAGA+ are listed on our Part Details page. You can also find images and similar parts to MAX16129UAAGA+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX16129UAAGA+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX16129UAAGA+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX16129UAAGA+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX16129UAAGA+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX16129UAAGA+ have stock available?

Authorised distributors including element14, Farnell and Newark Electronics have stock available or on a lead time for MAX16129UAAGA+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX16129UAAGA+ often in real-time on the comparison pages.

What if I can't find stock of MAX16129UAAGA+ ?

You can fill out our help required form which you can use to request a quote for MAX16129UAAGA+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.