MAX16826ATJ+ by Analog Devices

Programmable, Four-String HB LED Driver with Output-Voltage Optimization and Fault Detection

Status: Active
Series: MAX16826
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX16826 high-brightness LED (HB LED) driver is designed for backlighting automotive LCD displays and other display applications such as industrial or desktop monitors and LCD televisions. The MAX16826 integrates a switching regulator controller, a 4-channel linear current sink driver, an analog-to-digital converter (ADC), and an I2C interface. The IC is designed to withstand automotive load dump transients up to 40V and can operate under cold crank conditions. The MAX16826 contains a current-mode PWM switching regulator controller that regulates the output voltage to the LED array. The switching regulator section is configurable as a boost or SEPIC converter and its switching frequency is programmable from 100kHz to 1MHz. The MAX16826 includes 4 channels of programmable, fault-protected, constant-current sink driver controllers that are able to drive all white, RGB, or RGB plus amber LED configurations. LED dimming control for each channel is implemented by direct PWM signals for each of the four linear current sinks. An internal ADC measures the drain voltage of the external driver transistors and the output of the switching regulator. These measurements are then made available through the I2C interface to an external microcontroller (µC) to enable output voltage optimization and fault monitoring of the LEDs. The amplitude of the LED current in each linear current-sink channel and the switch-mode regulator output voltage is programmed using the I2C interface. Additional features include: cycle-by-cycle current limit, shorted LED string protection, and overtemperature protection. The MAX16826 is available in a thermally enhanced, 5mm x 5mm, 32-pin thin QFN package and is specified over the automotive -40°C to +125°C temperature range.

Where to Buy

Prices starting from US$6.52

Distributor Stock
Logo for Farnell UK
Farnell
from US$6.52
0
in stock
 Buy Now
Buy Now

Features

4 Channels of Programmable, Fault-Protected, Constant-Current Source-Driver Controllers for All White, RGB, or RGB Plus Amber LED Configurations Drives One to Four LED Strings Individual PWM Dimming Inputs per String Very Wide Dimming Range
Drives One to Four LED Strings
Individual PWM Dimming Inputs per String
Very Wide Dimming Range
Configurable as a boost or SEPIC Converter with Programmable 100kHz to 1MHz Switching Frequency for Design Flexibility Integrated Boost/SEPIC Controller External MOSFETs Allow Wide-Range LED Current with Multiple LEDs per String 200kHz to 2MHz Programmable Switching Frequency for Optimizing Size vs. Efficiency External Switching-Frequency Synchronization
Integrated Boost/SEPIC Controller
External MOSFETs Allow Wide-Range LED Current with Multiple LEDs per String
200kHz to 2MHz Programmable Switching Frequency for Optimizing Size vs. Efficiency
External Switching-Frequency Synchronization
I2C Allows the Current-Sink Drain Voltages to be Read to Minimize Power Dissipation and Detect LED String Fault Conditions 7-Bit Internal ADC for LED Voltage Monitoring and Optimization Dynamic Adjustment of LED String Currents and Output Voltage Standby Mode
7-Bit Internal ADC for LED Voltage Monitoring and Optimization
Dynamic Adjustment of LED String Currents and Output Voltage
Standby Mode
Protection Features Improve Reliability LED Short and Open Detection Overvoltage and Overtemperature Protection
LED Short and Open Detection
Overvoltage and Overtemperature Protection

Specifications

VIN (V) (min) 4.75
VIN (V) (max) 24
Max. No. of LEDs 100
# LED Channels 4
Regulation Topology Inductor Based
LED Configuration Series-Parallel
ILED per Channel (A) (max) 1
PWM Dimming Freq. (kHz) (max) 100
Dimming Ratio (max) 5000
Dimming Control I2C SerialPWM
VCURR_SENSE (mV) 99
POUT (W) 100
ICC (mA) (max) 10
LED String Volt. (V) (max) 100
Switching Frequency (kHz) 1000
Package/Pins TQFN/32
BudgetaryPrice (See Notes) 3.55

Last 6 months Inventory & Pricing History

MAX16826ATJ+ LED Driver ICs by Analog Devices

LED DRIVER, BOOST/SEPIC, 1MHZ, TQFN-32

LED Lighting Components
> LED Driver ICs
> DC / DC LED Driver ICs
Status: Unknown
Series: -
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Device Topology Boost, SEPIC
Input Voltage Min 4.75V
Input Voltage Max 24V
Output Voltage Max 100V
Output Current Max 15mA
Switching Frequency 1MHz
No. of Outputs 4Outputs
RoHS Compliant Yes

Last 6 months Inventory & Pricing History

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX16826ATJ+ ?

Additional datasheets, footprints and schematics for MAX16826ATJ+ are listed on our Part Details page. You can also find images and similar parts to MAX16826ATJ+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX16826ATJ+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX16826ATJ+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX16826ATJ+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX16826ATJ+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX16826ATJ+ have stock available?

Authorised distributors including Farnell have stock available or on a lead time for MAX16826ATJ+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX16826ATJ+ often in real-time on the comparison pages.

What if I can't find stock of MAX16826ATJ+ ?

You can fill out our help required form which you can use to request a quote for MAX16826ATJ+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.