MAX25601CATJ/VY+ by Analog Devices

Synchronous Boost and Synchronous Buck LED Controllers

Status: Active
Series: MAX25601C
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX25601A/B/C/D is a synchronous boost controller followed by a synchronous buck LED controller. The 4.5V to 40V input voltage range of the boost controller is ideal for automotive applications, and acts as a pre-boost power supply for the second-stage buck LED controller. The synchronous boost is a current-mode controller that can be be paralleled with another device to provide higher output power. A SYNCOUT pin provides the clock to drive the RT/SYNCIN pin of the other device, enabling two-phase 180-degree out-of-phase operation. The boost converter can be programmed with a switching frequency of 200kHz to 2.2MHz. Spread spectrum is included to reduce EMI. An internal digital soft-start feature is provided to enable a smooth power up of the boost output. Protection features like hiccup mode, overvoltage protection, and thermal shutdown are provided. The synchronous buck LED controller uses Maxim's F3 Architecture, a proprietary average-current-mode control scheme to regulate the inductor current at a constant switching frequency without any control-loop compensation. Inductor current is sensed in the bottom synchronous n-channel MOSFET. The device operates over a wide 4.5V to 65V input range at switching frequencies as high as 1MHz. Both analog and PWM dimming are included. LED current can be monitored on the IOUTV pin. Both controllers have high- and low-side gate drivers with at least 1A peak source and sink-current capability. Adaptive non-overlap control logic prevents shoot-through currents during transition. Both the boost and the buck faults are monitored on the active-low FLT pin. The MAX25601A/C is available in a 32-pin SWTQFN package and the MAX25601B/D is available in a 28-pin TSSOP package. The 32-pin package features an additional switch control that can be used in high-beam/low-beam and heads-up display applications.

Where to Buy

Prices starting from US$4.67

Distributor Stock
Logo for Newark
Newark Electronics
from US$6.15
11
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$6.04
11
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$4.67
11
in stock
 Buy Now
Buy Now

Features

Integration Minimizes BOM for High-Brightness LED Driver, Saving Space and Cost Wide Input-Voltage Range from 4.5V to 40V Wide Boost-Output Range up to 65V Programmable Switching Frequency Optimizes Component Size External MOSFETs Can be Sized for Appropriate Current Synchronous Rectification Provides High Efficiency and Fast Transient Response Average Current-Mode Control for Buck Eliminates Compensation Components
Wide Input-Voltage Range from 4.5V to 40V
Wide Boost-Output Range up to 65V
Programmable Switching Frequency Optimizes Component Size
External MOSFETs Can be Sized for Appropriate Current
Synchronous Rectification Provides High Efficiency and Fast Transient Response
Average Current-Mode Control for Buck Eliminates Compensation Components
Wide Dimming Ratio Allows High Contrast Ratio Analog Dimming and PWM Dimming Analog Voltage-Controlled PWM Dimming
Analog Dimming and PWM Dimming
Analog Voltage-Controlled PWM Dimming
Protection Features and Wide Temperature Range Increase System Reliability Short Circuit, Overvoltage, and Thermal Protection -40°C to +125°C Operating Temperature Range
Short Circuit, Overvoltage, and Thermal Protection
-40°C to +125°C Operating Temperature Range

Specifications

VIN (V) (min) 4.5
VIN (V) (max) 48
Max. No. of LEDs 15
# LED Channels 1
Regulation Topology Inductor Based
ILED per Channel (A) (max) 30
PWM Dimming Freq. (kHz) (max) 2
Dimming Ratio (max) 10000
Dimming Control AnalogAnalog Controlled PWMPWM
VCURR_SENSE (mV) 200
POUT (W) 100
LED String Volt. (V) (max) 60
Switching Frequency (kHz) 1000
Package/Pins TQFN-CU/32
BudgetaryPrice (See Notes) 3.16

Last 6 months Inventory & Pricing History

MAX25601CATJ/VY+ LED Driver ICs by Analog Devices

LED DRIVER, AEC-Q100, 2.2MHZ, SWTQFN-EP

LED Lighting Components
> LED Driver ICs
> DC / DC LED Driver ICs
Status: Unknown
Series: -
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

RoHS Compliant YES

Last 6 months Inventory & Pricing History

Alternative Descriptions

Led Driver, Aec-Q100, 2.2Mhz, Swtqfn-Ep Rohs Compliant: Yes |Maxim Integrated/analog Devices MAX25601CATJ/VY+ | Newark Electronics

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX25601CATJ/VY+ ?

Additional datasheets, footprints and schematics for MAX25601CATJ/VY+ are listed on our Part Details page. You can also find images and similar parts to MAX25601CATJ/VY+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX25601CATJ/VY+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX25601CATJ/VY+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX25601CATJ/VY+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX25601CATJ/VY+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX25601CATJ/VY+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX25601CATJ/VY+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX25601CATJ/VY+ often in real-time on the comparison pages.

What if I can't find stock of MAX25601CATJ/VY+ ?

You can fill out our help required form which you can use to request a quote for MAX25601CATJ/VY+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.