MAX3421EETJ+ by Analog Devices

USB Peripheral/Host Controller with SPI Interface

Status: Active
Series: MAX3421E
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX3421E USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. A built-in transceiver features ±15kV ESD protection and programmable USB connect and disconnect. An internal serial interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3421E operates using a register set accessed by an SPI interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc.) can add USB peripheral or host functionality using the simple 3- or 4-wire SPI interface. The MAX3421E makes the vast collection of USB peripherals available to any microprocessor, ASIC, or DSP when it operates as a USB host. For point-to-point solutions, for example, a USB keyboard or mouse interfaced to an embedded system, the firmware that operates the MAX3421E can be simple since only a targeted device is supported. Internal level translators allow the SPI interface to run at a system voltage between 1.4V and 3.6V. USB-timed operations are done inside the MAX3421E with interrupts provided at completion so an SPI master does not need timers to meet USB timing requirements. The MAX3421E includes eight general-purpose inputs and outputs so any microprocessor that uses I/O pins to implement the SPI interface can reclaim the I/O pins and gain additional ones. The MAX3421E operates over the extended -40°C to +85°C temperature range and is available in a 32-pin TQFP package (5mm x 5mm) and a 32-pin TQFN package (5mm x 5mm). FAQs: MAX3421E

Where to Buy

Prices starting from US$9.06

Distributor Stock
Logo for Newark
Newark Electronics
from US$9.06
31
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$11.60
31
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$11.48
31
in stock
 Buy Now
Buy Now

Features

Microprocessor-Independent USB Solution
Software Compatible with the MAX3420E USB Peripheral Controller with SPI Interface
Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
Integrated USB Transceiver
Firmware/Hardware Control of an Internal D+ Pullup Resistor (Peripheral Mode) and D+/D- Pulldown Resistors (Host Mode)
Programmable 3- or 4-Wire, 26MHz SPI Interface
Level Translators and VL Input Allow Independent System Interface Voltage
Internal Comparator Detects VBUS for Self-Powered Peripheral Applications
ESD Protection on D+, D-, and VBCOMP
Interrupt Output Pin (Level- or Programmable-Edge) Allows Polled or Interrupt-Driven SPI Interface
Eight General-Purpose Inputs and Eight General-Purpose Outputs
Interrupt Signal for General-Purpose Input Pins, Programmable Edge Polarity
Intelligent USB SIE
Automatically Handles USB Flow Control and Double Buffering
Handles Low-Level USB Signaling Details
Contains Timers for USB Time-Sensitive Operations so SPI Master Does Not Need to Time Events
Space-Saving Lead-Free TQFP and TQFN Packages (5mm x 5mm)

Specifications

VSUPPLY (V) 3.3
ISUPPLY (mA) (max) 45
Host Speed (Mbps) 12/1.5
Peripheral Speed (Mbps) 12
SPI Clock (MHz) 0 to 26
VL (V) 1.4 to 3.6
Package/Pins TQFN/32TQFP/32
Oper. Temp. (°C) -40 to +85
BudgetaryPrice (See Notes) 5.05

Last 6 months Inventory & Pricing History

MAX3421EETJ+ Semiconductors - ICs by Analog Devices

USB PERIPHERAL/HOST CNTR 12MBPS TQFN32

Semiconductors - ICs
> Drivers & Interfaces
> USB Interfaces
Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

USB IC Type ESD-Protected USB Peripheral/Host Controller
USB Standard USB 2.0
Supply Voltage Min 3V
Supply Voltage Max 3.6V
Interface Case Style TQFN
No. of Pins 32Pins
Data Rate 12Mbps
No. of Ports 1 Port, 1Ports
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)
USB Type USB Host / Peripheral Controller

Last 6 months Inventory & Pricing History

Alternative Descriptions

Usb Cntrl, 12Mbps, 1Port, Tqfn-32 | Newark Electronics
USB PERIPHERAL/HOST CNTRL, 85DEGC | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX3421EETJ+ ?

Additional datasheets, footprints and schematics for MAX3421EETJ+ are listed on our Part Details page. You can also find images and similar parts to MAX3421EETJ+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX3421EETJ+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX3421EETJ+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX3421EETJ+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX3421EETJ+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX3421EETJ+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX3421EETJ+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX3421EETJ+ often in real-time on the comparison pages.

What if I can't find stock of MAX3421EETJ+ ?

You can fill out our help required form which you can use to request a quote for MAX3421EETJ+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.