MAX487EESA+T by Analog Devices

±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

Status: Active
Series: MAX487E
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX481E, MAX483E, MAX485E, MAX487E- MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro-static discharge (ESD) shocks, without latchup. These parts contain one driver and one receiver. The MAX483E, MAX487E, MAX488E, and MAX489E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481E, MAX485E, MAX490E, MAX491E, and MAX1487E are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw as little as 120µA supply current when unloaded or when fully loaded with disabled drivers (see Selector Guide). Additionally, the MAX481E, MAX483E, and MAX487E have a low-current shutdown mode in which they consume only 0.5µA. All parts operate from a single +5V supply. Drivers are short-circuit current limited, and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX487E and MAX1487E feature quarter-unit-load receiver input impedance, allowing up to 128 transceivers on the bus. The MAX488E-MAX491E are designed for full-duplex communications, while the MAX481E, MAX483E, MAX485E, MAX487E, and MAX1487E are designed for half-duplex applications. For applications that are not ESD sensitive see the pinand function-compatible MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487.

Where to Buy

Prices starting from US$1.39

Distributor Stock
Logo for Analog Devices
Analog Devices
from US$4.01
53,067
in stock
 Buy Now
Logo for Schukat Electronic
Schukat Electronic
from US$1.39
3,140
in stock
 Buy Now
Logo for Newark
Newark Electronics
from US$5.26
1,240
in stock
 Buy Now
Logo for element14 Singapore
element14
from US$5.59
1,007
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$4.79
1,007
in stock
 Buy Now
Logo for Rochester Electronics
Rochester Electronics
from US$3.52
756
in stock
 Buy Now
Logo for Micros
Micros
from US$1.62
99
in stock
 Buy Now
Logo for Buerklin
Buerklin
from US$1.51
0
in stock
 Buy Now
Buy Now

Features

For Fault-Tolerant Applications: MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V, RS-485 Transceiver MAX3080-MAX3089: Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited, RS-485/RS-422 Transceivers
For Space-Constrained Applications: MAX3460-MAX3464: +5V, Fail-Safe, 20Mbps, Profibus, RS-485/RS-422 Transceivers MAX3362: +3.3V, High-Speed, RS-485/RS-422 Transceiver in a SOT23 Package MAX3280E-MAX3284E: ±15kV ESD-Protected, 52Mbps, +3V to +5.5V, SOT23, RS-485/RS-422 True Fail-Safe Receivers MAX3030E-MAX3033E: ±15kV ESD-Protected, +3.3V, Quad RS-422 Transmitters
For Multiple Transceiver Applications: MAX3293/MAX3294/MAX3295: 20Mbps, +3.3V, SOT23, RS-485/RS-422 Transmitters
For Fail-Safe Applications: MAX3440E-MAX3444E: ±15kV ESD-Protected, ±60V Fault-Protected, 10Mbps, Fail-Safe RS-485/J1708 Transceivers
For Low-Voltage Applications: MAX3483E/MAX3485E/MAX3486E/MAX3488E/ MAX3490E/MAX3491E: +3.3V Powered, ±15kV ESD-Protected, 12Mbps, Slew-Rate-Limited, True RS-485/RS-422 Transceivers

Specifications

# Tx/Rx 1Tx + 1Rx
Duplex Half
VSUPPLY (V) 5
Data Rate (kbps) (min) 250
ICC (mA) (typ) 0.25
ESD Protect. (±kV) 15
Tx EN Yes
Rx EN Yes
ICC (Shutdn.) (µA) (typ) 0.5
Oper. Temp. (°C) -40 to +850 to +70
Package/Pins PDIP/8SOIC (N)/8
BudgetaryPrice (See Notes) 2.19

Last 6 months Inventory & Pricing History

MAX487EESA+T Semiconductors - ICs by Analog Devices

RS422/RS485 TXRX 250KBPS 5.25V NSOIC

Semiconductors - ICs
> Drivers & Interfaces
> RS232, RS485, RS422 Transceivers
Status: Unknown
Series: -
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The MAX481E, MAX483E, MAX485E, MAX487E– MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environ- ments. Each driver output and receiver input is protected against ±15kV electro-static discharge (ESD) shocks, without latchup. These parts contain one driver and one receiver. The MAX483E, MAX487E, MAX488E, and MAX489E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly termi- nated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481E, MAX485E, MAX490E, MAX491E, and MAX1487E are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw as little as 120µA supply cur- rent when unloaded or when fully loaded with disabled drivers (see Selector Guide). Additionally, the MAX481E, MAX483E, and MAX487E have a low-current shutdown mode in which they consume only 0.5µA. All parts oper- ate from a single +5V supply. Drivers are short-circuit current limited, and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high-impedance state. The receiver input has a fail-safe feature that guar- antees a logic-high output if the input is open circuit. The MAX487E and MAX1487E feature quarter-unit-load receiver input impedance, allowing up to 128 trans- ceivers on the bus. The MAX488E–MAX491E are designed for full-duplex communications, while the MAX481E, MAX483E, MAX485E, MAX487E, and MAX1487E are designed for half-duplex applications. For applications that are not ESD sensitive see the pin- and function-compatible MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487.

Specifications

Device Type Transceiver
IC Interface Type RS422 RS485
No. of Drivers 1Drivers
No. of Receivers 1Receivers
Supply Voltage Min 4.75V
Supply Voltage Max 5.25V
Driver Case Style NSOIC
No. of Pins 8Pins
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range -
Automotive Qualification Standard -
MSL MSL 1 - Unlimited
IC Generic Number MAX487E
SVHC No SVHC (15-Jan-2018)

Last 6 months Inventory & Pricing History

Alternative Descriptions

±15kV ESD-Protected, Slew-Rate | Analog Devices
RS485/422 Transc. -40/+85°C SO8 | Schukat Electronic
Rs422/Rs485 Txrx, 250Kbps, 5.25V, Nsoic | Newark Electronics
RS422/RS485 TXRX, 250KBPS, 5.25V, NSOIC | element14
RS-485/RS-422 Transc. w/ SD, Half-Duplex, 0.25Mbps, c15kV ESD prot., 5V, -40÷85° | Micros
RS-485/RS-422 Transceivers, SOIC-8, Maxim Integrated MAX487EESA+T | Buerklin

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX487EESA+T ?

Additional datasheets, footprints and schematics for MAX487EESA+T are listed on our Part Details page. You can also find images and similar parts to MAX487EESA+T on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX487EESA+T on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX487EESA+T price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX487EESA+T you can contact the distributor directly for product support, shipping queries etc.

Is the MAX487EESA+T RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX487EESA+T have stock available?

Authorised distributors including Analog Devices, Schukat Electronic, Newark Electronics, element14 and Farnell have stock available or on a lead time for MAX487EESA+T .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX487EESA+T often in real-time on the comparison pages.

What if I can't find stock of MAX487EESA+T ?

You can fill out our help required form which you can use to request a quote for MAX487EESA+T from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.