MAX98357BETE+ by Analog Devices

Tiny, Low-Cost, PCM Class D Amplifier with Class AB Performance

Status: Active
Series: MAX98357B
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock
For improved performance, functionality, and even lower power consumption Maxim Integrated recommends the MAX98360. The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range.

Where to Buy

Prices starting from US$3.04

Distributor Stock
Logo for Farnell UK
Farnell
from US$3.04
0
in stock
 Buy Now
Buy Now

Features

Single-Supply Operation (2.5V to 5.5V)
3.2W Output Power into 4Ω at 5V
2.4mA Quiescent Current
92% Efficiency (RL = 8Ω, POUT = 1W)
22.8µVRMS Output Noise (AV = 15dB)
Low 0.013% THD+N at 1kHz
No MCLK Required
Sample Rates of 8kHz to 96kHz
Supports Left, Right, or (Left/2 + Right/2) Output
Sophisticated Edge Rate Control Enables Filterless Class D Outputs
77dB PSRR at 1kHz
Low RF Susceptibility Rejects TDMA Noise from GSM Radios
Extensive Click-and-Pop Reduction Circuitry
Robust Short-Circuit and Thermal Protection
Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN
Solution Size with Single Bypass Capacitor is4.32mm2

Specifications

# Channels 1
Class D
Spkr. Amp. VCC (V) (min) 2.5
Spkr. Amp. VCC (V) (max) 5.5
Spkr. Amp. ICC (mA) (typ) 2.5
POUT into 4Ω @ 1% THD+N (W) (min) 2.5
POUT into 4Ω @ 10% THD+N (W) (min) 3.2
POUT into 8Ω @ 1% THD+N (W) (min) 1.4
POUT into 8Ω @ 10% THD+N (W) (min) 1.8
Spkr. Amp. Half Pwr. THD+N (%) 0.013
SNR (dB) (A- Weighted) 105
PSRR (dB) (min) 77
Package/Pins TQFN/16WLP/9
BudgetaryPrice (See Notes) 1.07

MAX98357BETE+ Amplifiers & Comparators by Analog Devices

AMPLIFIER CLASS-D 1-CH 3.2W TQFN-16

Semiconductors - ICs>Amplifiers & Comparators>Audio Amplifiers
Status: Unknown
Series: MAX98357B Series
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Amplifier Class D
No. of Channels 1 Channel
Output Power 3.2W
Supply Voltage Range 2.5V to 5.5V
Amplifier Case Style TQFN
No. of Pins 16Pins
Load Impedance 4ohm
Operating Temperature Min -40°C
Operating Temperature Max 85°C
Product Range MAX98357B Series
Automotive Qualification Standard -
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)

Alternative Descriptions

AMPLIFIER, CLASS-D, 1-CH, 3.2W, TQFN-16 | Farnell

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAX98357BETE+ ?

Additional datasheets, footprints and schematics for MAX98357BETE+ are listed on our Part Details page. You can also find images and similar parts to MAX98357BETE+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAX98357BETE+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAX98357BETE+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAX98357BETE+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAX98357BETE+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAX98357BETE+ have stock available?

Authorised distributors including Farnell have stock available or on a lead time for MAX98357BETE+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAX98357BETE+ often in real-time on the comparison pages.

What if I can't find stock of MAX98357BETE+ ?

You can fill out our help required form which you can use to request a quote for MAX98357BETE+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.