MAXQ7667AACM/V+ by Analog Devices

16-Bit, RISC, Microcontroller-Based, Ultrasonic Distance-Measuring System


The MAXQ7667 smart system-on-a-chip (SoC) provides a time-of-flight ultrasonic distance-measuring solution. The device is optimized for applications involving large distance measurement with weak input signals or multiple target identification. The MAXQ7667 features high signal-to-noise ratio achieved by combining flexible electronics with the intelligence necessary to optimize each function as environmental and target conditions change. An integrated burst signal generator and echo reception components process ultrasonic signals between 25kHz and 100kHz. Echo reception components include a programmable gain low-noise amplifier (LNA), a 16-bit sigma-delta ADC to digitize the received echo signals, and digital signal processing (DSP). DSP limits noise with a bandpass filter, and creates an echo envelope through demodulation and lowpass filtering. Input referred noise is a low 0.7µVRMS. A programmable phase-locked loop (PLL) frequency synthesizer supplies the reference frequency for the burst generator and the clock for the echo receiver's digital filter. An embedded 16-bit MAXQ20 microcontroller (µC) controls all the preceding functions. The µC optimizes the burst frequency and reception frequency for each transmission at any temperature. The MAXQ7667 achieves smart sensing by monitoring the echo signals and then actively changing the transmitted and received parameters to obtain optimum results. Digital filtering and burst synthesis do not require CPU intervention. This leaves all the CPU power available for echo optimization, communication, diagnostics, and additional signal processing. The MAXQ7667 operates with three different power supply voltages: +5V, +3.3V, and +2.5V. Two internal linear regulators allow operation from a single +5V supply when three external power supplies are not available. Alternatively, the MAXQ7667 can control an external pass transistor to allow operation from a single supply voltage of +8V to +65V or more, depending on the external component tolerance. The device is available in a 48-pin LQFP package and is specified to operate from -40°C to +125°C. Note: Designers must have the following documents to fully use all the features of this device. This data sheet contains pin descriptions, feature overviews, and electrical specifications. Errata sheets contain deviations from published specifications. The user's guides offer detailed information about device features and operation. MAXQ7667 IC data sheet MAXQ7667 revision-specific errata sheet (Click here for availability) MAXQ7667 User's Guide

Where to Buy

Prices starting from US$19.59

Distributor Stock
Logo for Newark
Newark Electronics
from US$20.03
240
in stock
Buy Now
Logo for element14 Singapore
element14
from US$21.68
240
in stock
Buy Now
Logo for Farnell UK
Farnell
from US$19.59
240
in stock
Buy Now
Buy Now

Features

Smart Analog Peripherals Dedicated Ultrasonic Burst Generator Echo Receiving Path (Includes LNA, Sigma-Delta ADC) 5-Channel, 12-Bit SAR ADC with 250ksps Sampling Rate Internal Bandgap Voltage Reference for the ADCs (Also Accepts External Voltage Reference)
Dedicated Ultrasonic Burst Generator
Echo Receiving Path (Includes LNA, Sigma-Delta ADC)
5-Channel, 12-Bit SAR ADC with 250ksps Sampling Rate
Internal Bandgap Voltage Reference for the ADCs (Also Accepts External Voltage Reference)
Timer/Digital I/O Peripherals
High-Performance, Low-Power, 16-Bit RISC Core
Program and Data Memory
Crystal/Clock Module
16 x 16 Hardware Multiplier with 48-Bit Accumulator, Single Clock Cycle
Power-Management Module
JTAG Interface
Universal Asynchronous Receiver-Transmitter (UART)
Local Interconnect Network (LIN)

Specifications

Sensing Element Ultrasonic Transducer
PGA Gain 60 to 1000 (22 gains)
Calibration Method Integrated microcontroller with FLASH memory
Output Type Digital
ICC (mA) (typ) 25
Interface LINSPIUART
Microcontroller/CPU Microcontroller (16-bit, 16 MHz)
DACs/ADCs 12-bit ADC
VSUPPLY (V) 4.5 to 5.5
Package/Pins LQFP/48
BudgetaryPrice (See Notes) 11.68

Last 6 months Inventory & Pricing History



MAXQ7667AACM/V+ Semiconductors - ICs by Analog Devices

MCU 16BIT 16MHZ LQFP-48

Status: Unknown
Series: MAX Family MAXQ766x Series Microcontrollers
RoHS: Unknown
Download Datasheet Visit Manufacturer Site View Pricing & Stock

Specifications

Product Range MAX Family MAXQ766x Series Microcontrollers
Architecture -
No. of Bits 16bit
CPU Speed 16MHz
Program Memory Size 32KB
RAM Memory Size 4KB
No. of Pins 48Pins
MCU Case Style LQFP
No. of I/O's 16I/O's
Embedded Interface Type SPI UART
Supply Voltage Min 2.25V
Supply Voltage Max 5.5V
MCU Family MAX
MCU Series MAXQ766x
RoHS Phthalates Compliant To Be Advised
MSL MSL 1 - Unlimited
SVHC No SVHC (15-Jan-2018)
Automotive Qualification Standard AEC-Q100

Last 6 months Inventory & Pricing History


Alternative Descriptions

Mcu, Aec-Q100, 16Bit, 16Mhz, Lqfp-48 | Newark Electronics
MCU, 16BIT, 16MHZ, LQFP-48 | element14

Frequently Asked Questions

Where can I find additional details, specifications and documents for a MAXQ7667AACM/V+ ?

Additional datasheets, footprints and schematics for MAXQ7667AACM/V+ are listed on our Part Details page. You can also find images and similar parts to MAXQ7667AACM/V+ on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for MAXQ7667AACM/V+ on our Product Comparison page. Access via the 'View Pricing & Stock' button to view MAXQ7667AACM/V+ price breaks, MOQs, lead times, inventory and SKUs from distributors.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the MAXQ7667AACM/V+ you can contact the distributor directly for product support, shipping queries etc.

Is the MAXQ7667AACM/V+ RoHS compliant?

This part has not been flagged as RoHS Compliant.

Which authorised distributors for MAXQ7667AACM/V+ have stock available?

Authorised distributors including Newark Electronics, element14 and Farnell have stock available or on a lead time for MAXQ7667AACM/V+ .

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for MAXQ7667AACM/V+ often in real-time on the comparison pages.

What if I can't find stock of MAXQ7667AACM/V+ ?

You can fill out our help required form which you can use to request a quote for MAXQ7667AACM/V+ from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.