PM2-LL10 Industrial Sensors by Panasonic
| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
Specifications
| CE Marking Directives | EMC Directive, RoHS Directive |
|---|---|
| Sensing Range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in ) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in ) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation. |
| Minimum Sensing Object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in ) |
| Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in ) |
| Repeatability (Perpendicular to Sensing Axis) | 0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in ) at a setting distance of 5 mm 0.197 in . |
| Supply Voltage | 5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less |
| Current Consumption | Average: 25 mA or less, Peak: 80 mA or less |
| Output | NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output: Over-Current Protection | Incorporated |
| Output: Utilization Category | DC-12 or DC-13 |
| Response Time | 0.8 ms or less |
| Operation Indicator | Red LED (lights up when the output is ON) |
| Pollution Degree | 3 (Industrial environment) |
| Ambient Temperature | –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉ |
| Ambient Humidity | 45 to 85 % RH, Storage: 45 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,500 lx or less at the light-receiving face |
| Vibration Resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting Element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil , modulated) |
| Material | Enclosure: Polycarbonate, Terminal part: HSM (Ag plated) |
| Cable | - |
| Cable Length | Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable. (If the cable is extended for 2 m 6.562 ft , or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.) |
| Weight (Typ.) | Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package) |
Last 6 months Inventory & Pricing History
Alternative Descriptions
| Sensor, Photo, Convergent, 8Mm, Npn Lo | Newark Electronics |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a PM2-LL10?
Additional datasheets, footprints and schematics for PM2-LL10 are listed on our Part Details page. You can also find images and similar parts to PM2-LL10 on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for PM2-LL10 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view PM2-LL10 price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does PM2-LL10 fall under?
The PM2-LL10 is listed under Industrial Automation > Industrial Sensors > Micro Photoelectric Sensors > Convergent Reflective Micro Photoelectric Sensor PM2.
Can I view similar or alternative parts?
You can view similar parts to PM2-LL10 when available in the Convergent Reflective Micro Photoelectric Sensor PM2 range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the PM2-LL10 you can contact the distributor directly for product support, shipping queries etc.
Is the PM2-LL10 RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for PM2-LL10 have stock available?
Authorised distributors including Newark Electronics have stock available or on a lead time for PM2-LL10.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for PM2-LL10 often in real-time on the comparison pages.
What if I can't find stock of PM2-LL10?
You can fill out our help required form which you can use to request a quote for PM2-LL10 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.