| Status: | Unknown |
|---|---|
| Series: | - |
| RoHS: | Unknown |
| CE Marking Directives | EMC Directive, RoHS Directive |
|---|---|
| Sensing Range | 6 mm 0.236 in (fixed) |
| Minimum Sensing Object | 0.8 × 1.2 mm 0.031 × 0.047 in opaque object |
| Hysteresis | 0.05 mm 0.002 in or less |
| Repeatability | 0.01 mm 0.0004 in or less |
| Supply Voltage | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Current Consumption | 15 mA or less |
| Output | NPN open-collector transistor Maximum sink current: 50 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Output: Output Operation | Incorporated with 2 outputs: Light-ON / Dark-ON |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) : The response frequency is the value when the disc, given in the figure below, is rotated. |
| Operation Indicator | Orange LED (lights up under light received condition) |
| Pollution Degree | 3 |
| Protection | IP64 (IEC) |
| Ambient Temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ (Note) : In case is used at an ambient temperature of +50 ℃ +122 ℉, or more, make sure to mount it on a metal body. |
| Ambient Humidity | 5 to 85 % RH, Storage: 5 to 95 % RH |
| Ambient Illuminance | Fluorescent light: 1,000 â„“x at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
| Shock Resistance | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each |
| Emitting Element | Infrared LED (Peak emission wavelength: 855 nm 0.034 mil , non-modulated) |
| Material | Enclosure: PBT Display section: Polycarbonate |
| Cable | 0.09-mm2 4-core cabtyre cable, PVC, 3 m 9.843 ft long |
| Wiring Length | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher. (Note 2) : For safety applications, do not exceed 30 m 98.425 ft. |
| Weight (Typ.) | Net weight: 30 g approx Gross weight: 35 g approx. |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉ . |
| Dummy | UL/c-UL certification |
| u-shape type, Sensor 6mm, NPN, cable 3m | RS |
| Photoelectric Sensor, 855Nm Infrared Led Rohs Compliant: Yes |Panasonic PM-F25-C3 | Newark Electronics |
| PHOTOELECTRIC SENSOR, 855NM INFRARED LED | element14 |
| Gabellichtschranke, 0,006 m, NPN, 5-24 VDC, Kabelanschluss, IP64, PM-F25-C3 | Buerklin |
Where can I find additional details, specifications and documents for a PM-F25-C3?
Additional datasheets, footprints and schematics for PM-F25-C3 are listed on our Part Details page. You can also find images and similar parts to PM-F25-C3 on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for PM-F25-C3 on our Product Comparison page. Access via the 'View Pricing & Stock' button to view PM-F25-C3 price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does PM-F25-C3 fall under?
The PM-F25-C3 is listed under Industrial Automation > Industrial Sensors > Micro Photoelectric Sensors > Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Ultra-small / Cable type] PM-25.
Can I view similar or alternative parts?
You can view similar parts to PM-F25-C3 when available in the Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Ultra-small / Cable type] PM-25 range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the PM-F25-C3 you can contact the distributor directly for product support, shipping queries etc.
Is the PM-F25-C3 RoHS compliant?
This part has not been flagged as RoHS Compliant.
Which authorised distributors for PM-F25-C3 have stock available?
Authorised distributors including RS, Newark Electronics, element14, Buerklin and Farnell have stock available or on a lead time for PM-F25-C3.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for PM-F25-C3 often in real-time on the comparison pages.
What if I can't find stock of PM-F25-C3?
You can fill out our help required form which you can use to request a quote for PM-F25-C3 from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.